Solved

Routing Table

Posted on 2008-10-08
3
276 Views
Last Modified: 2012-06-21
Can you stop a network card updating the routing table on a windows 2003 server
0
Comment
Question by:NSSUK
  • 2
3 Comments
 
LVL 5

Expert Comment

by:CAGdorf
ID: 22673576
Are you just wanting to keep a static route? You can use the route command to set metrics and interfaces. But I don't know about disabling dynamic routing all together.
0
 

Author Comment

by:NSSUK
ID: 22673633
I have an issue with an exchnage 2003 box, the routing table only used to show entries from one of the network card now it shows entries for both network cards, one card connects to the internal switch and the other direct to a cisco router for external email.
0
 
LVL 5

Accepted Solution

by:
CAGdorf earned 500 total points
ID: 22673760
I think it would show all if you do a route print without specifying the adapter. It needs to know internal routes as well as external to send/receive e-mail internally and externally.
0

Featured Post

Connect further...control easier

With the ATEN CE624, you can now enjoy a high-quality visual experience powered by HDBaseT technology and the convenience of a single Cat6 cable to transmit uncompressed video with zero latency and multi-streaming for dual-view applications where remote access is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

If your business is like most, chances are you still need to maintain a fax infrastructure for your staff. It’s hard to believe that a communication technology that was thriving in the mid-80s could still be an essential part of your team’s modern I…
For many of us, the  holiday season kindles the natural urge to give back to our friends, family members and communities. While it's easy for friends to notice the impact of such deeds, understanding the contributions of businesses and enterprises i…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

840 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question