• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 651
  • Last Modified:

Blower for closing swimming pool

We want to close our own swimming pool this year and need an air blower thing that blows the water out of the lines. I don't know what it is called.

Can someone tell us what we need to close our pool up and where we can get the product?

thanks.

0
Starr Duskk
Asked:
Starr Duskk
  • 2
1 Solution
 
hewittgCommented:
Here is some info that will help.  Do not need a real tool, just a shop vac

:-)

http://swimming.about.com/od/poolandspamaintenance/a/ingroundpoolclo.htm

Blow out the water from your plumbing lines. You can do this using a shop vac. Use the discharge of the shop vac to blow water out of each line from the filter system. As the water is purged from each line, you will need to put a plug in the lines at the pool end. Some fittings will allow for a threaded plug, which is best. Be sure to use a plug with a rubber gasket or "O" ring to make a seal, or the water may fill the line back up. If your fittings are not threaded, then use a rubber freeze plug.
0
 
hewittgCommented:
0

Featured Post

Free Tool: Subnet Calculator

The subnet calculator helps you design networks by taking an IP address and network mask and returning information such as network, broadcast address, and host range.

One of a set of tools we're offering as a way of saying thank you for being a part of the community.

  • 2
Tackle projects and never again get stuck behind a technical roadblock.
Join Now