Solved

Netflow for Netscreen 50

Posted on 2008-10-13
3
1,914 Views
Last Modified: 2012-05-05
I want to have monitor the traffic flow for a Netscreen 50 Firewall.
May i know is it have Netflow Protocol which like Cisco routers.
And how can i enable and setup if it do? Many thanks.
0
Comment
Question by:dickchan
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
3 Comments
 
LVL 32

Expert Comment

by:harbor235
ID: 22703740
Junper uses SFLOW with is an open standard

harbor235 ;}
0
 
LVL 32

Expert Comment

by:harbor235
ID: 22703824


The netscreen 50 is an older Netscreen legacy firewall which is end of sale. Here is a link identifying it's capabilites, SFLOW is not listed as a capability.

http://www.juniper.net/products/integrated/dsheet/110003.pdf

harbor235 ;}
0
 
LVL 32

Accepted Solution

by:
harbor235 earned 500 total points
ID: 22703851

It does however ever support a custom SNMP MIB which would allow you to pull traffic stats from the interfaces but would not give you the granularity and capabilites of a netflow or a sflow.

harbor235 ;}
0

Featured Post

Is your NGFW recommended by NSS Labs?

Ours is! NSS Labs Next Generation Firewall Test gives the WatchGuard Firebox M4600 a "Recommended" rating! Curious where your NGFW landed on the  Security Value Map? See the map and download the full report today!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In the hope of saving someone else's sanity... About a year ago we bought a Cisco 1921 router with two ADSL/VDSL EHWIC cards to load balance local network traffic over the two broadband lines we have, but we couldn't get the routing to work consi…
Getting hacked is no longer a matter or "if you get hacked" — the 2016 cyber threat landscape is now titled "when you get hacked." When it happens — will you be proactive, or reactive?
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

688 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question