Solved

Need help to limit user bandwitdh on cisco 7200

Posted on 2008-10-13
1
395 Views
Last Modified: 2012-06-21
I need to create a rule on a Cisco 7200 that do the following:
When a user reach X megabytes downloaded the router should limit the user speed, when the user reach Y megabytes downloaded the limit should be different.
An example:

User is downloading nothing, the speed is unlimited.
The User reach 100 mb downloaded, the router limit the speed to 100 kbps
The User reach 200 mb downloaded, the router limit the speed to 80 kbps
and so on....

Any help will be appreciated
0
Comment
Question by:nahime
1 Comment
 
LVL 11

Accepted Solution

by:
donmanrobb earned 500 total points
ID: 22707763
The closest thing Cisco has to that is User Based Rate Limiting but it is only supported on 6500s.
I think your best bet would be to setup a proxy server such as squid or ISA and setup such rules from there.
0

Featured Post

6 Surprising Benefits of Threat Intelligence

All sorts of threat intelligence is available on the web. Intelligence you can learn from, and use to anticipate and prepare for future attacks.

Join & Write a Comment

Suggested Solutions

Overview The Cisco PIX 501, PIX 506e, ASA 5505 and ASA 5510 (most if not all of this information will be relevant to the PIX 515e but I do not have a working configuration handy to verify the validity) are primarily used within small to medium busi…
Quality of Service (QoS) options are nearly endless when it comes to networks today. This article is merely one example of how it can be handled in a hub-n-spoke design using a 3-tier configuration.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

707 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

13 Experts available now in Live!

Get 1:1 Help Now