Solved

Sharing a shared drive from another network

Posted on 2008-10-13
2
698 Views
Last Modified: 2012-05-05
Server 2008 connected to one network and old NT box on another network.  These are joined in the server 2008 box through 2 NICs, one for the new network and the other is connected to the old network.  A share was setup on the new server 2008 to the old NT box.  How do I get the folks on the new network to use files on the old NT box directly through the 2008 Server box?  The authentication is of course different on 2008 than on the older NT box so I don't think passthrough auth will work or can even be implemented, can it?
0
Comment
Question by:jdfuller
2 Comments
 
LVL 2

Accepted Solution

by:
daviddriv earned 125 total points
ID: 22707321
I am not sure this is possible.  It sounds to me like you have mapped a drive on the 2008 box that points to a share on the NT box.  Windows doesn't let you share a mapped volume.  

One workaround would be to use the Windows 2008 box as a router to join the two networks (Internet Connection Sharing) and mapping a drive on each of the client computers pointing at the original share on the NT box.  See http://technet.microsoft.com/en-us/library/cc770507.aspx for info on ICS.
0
 

Author Closing Comment

by:jdfuller
ID: 31505717
A little more research pointed this out.  There are security problems with this as well because the passthrough will not work.  Authentication might be possible through the client but that is not an acceptable solution in this case.   Your answer is correct so the points are duly awarded.  We have taken a more stable route in this situation.  Thanks for your time to this question.
0

Featured Post

DevOps Toolchain Recommendations

Read this Gartner Research Note and discover how your IT organization can automate and optimize DevOps processes using a toolchain architecture.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
Join Greg Farro and Ethan Banks from Packet Pushers (http://packetpushers.net/podcast/podcasts/pq-show-93-smart-network-monitoring-paessler-sponsored/) and Greg Ross from Paessler (https://www.paessler.com/prtg) for a discussion about smart network …
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

813 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

19 Experts available now in Live!

Get 1:1 Help Now