Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people, just like you, are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
Solved

wireshark log analysis icmp problem

Posted on 2008-10-13
4
1,218 Views
Last Modified: 2013-11-29
In my asa firewall I get a ton of icmp traffic on a ip address internal that is not on my network  Looks like spoofing or something   but i get a ton of icmp traffic out to different web sites on same subnets... any ideas see picture
packet-picture.JPG
0
Comment
Question by:ckness
  • 2
  • 2
4 Comments
 
LVL 12

Expert Comment

by:Pugglewuggle
ID: 22708858
Something is wrong with the PC 192.168.1.50
192.169.45.x is the Windows IPv4 link failure loopback address - it is selected randomly when a cable is connected to a NIC but it isn't functioning as it should or isn't getting an IP via DHCP.
Check that out.
I seriously doubt this is an attack - just a malfunction on 192.168.1.50.
Cheers!
0
 

Author Comment

by:ckness
ID: 22710542
great answer problem is there is no pc on my network in that subnet nor is it routable so i can not trace route it,  whats the best way to determine where it is.  Also if its a loop back why does it go out to the internet to resolve ping,,,,
0
 
LVL 12

Accepted Solution

by:
Pugglewuggle earned 500 total points
ID: 22710567
That's what I was wondering too... Like i said though, if a PC is malfunctioning there's no telling what it will do.
How many machines are we dealing with?
0
 

Author Closing Comment

by:ckness
ID: 31505759
turned out to be a phone system behind a router that i was not routing for on lan/wan but allowed them to get internet..... took the gateway off machine took away traffic...
0

Featured Post

Free Tool: SSL Checker

Scans your site and returns information about your SSL implementation and certificate. Helpful for debugging and validating your SSL configuration.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

From Cisco ASA version 8.3, the Network Address Translation (NAT) configuration has been completely redesigned and it may be helpful to have the syntax configuration for both at a glance. You may as well want to read official Cisco published AS…
Quality of Service (QoS) options are nearly endless when it comes to networks today. This article is merely one example of how it can be handled in a hub-n-spoke design using a 3-tier configuration.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

860 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question