Solved

Error NETBT, Event ID 4321.

Posted on 2008-10-14
5
17,200 Views
Last Modified: 2013-11-05
I am getting the error 4321 NETBT.
The name "DOMAIN   :1d" could not be registered on the Interface with IP address 10.13.81.88. The machine with the IP address 10.13.83.149 did not allow the name to be claimed by this machine.
(where DOMAIN is the domain name)

Both machines are Windows 2003 server

The error is on the Secondary DC (10.13.81.88) refering to the Primary DC (10.13.83.149).

I am getting the error every few minutes.

Any Help Would be appreciated
0
Comment
Question by:Didsi
  • 3
  • 2
5 Comments
 
LVL 10

Expert Comment

by:kyleb84
ID: 22709769
This is a conflict, have you joined the Sec DC to the domain properly?

-Assuming your Pri DC is also a DNS Server
-Make sure the DNS server IP is set to your PDC's IP on your Sec DC's network interface.
-System Properties->Computer Name->Change->Select DOMAIN, and type in your domain's name
-Hit OK
-Type the PDC's Adminirstrator + Password in
-Hit OK

Should say

"Welcome to the XXX Domain"
0
 

Author Comment

by:Didsi
ID: 22709813
Thank you, i cannot attempt this at the moment as the server is in use but i will try today.
Are you sure the DNS ip on the Second DC's NIC should be the PDC's IP. I have it as itself due to it been a DNS server aswell.
0
 
LVL 10

Expert Comment

by:kyleb84
ID: 22709867
Yes, just to join it to the domain first, the set it to itself (127.0.0.1)

Once joined, set your primary DNS forwarder to your ISP's DNS server.

Goto:
http://support.microsoft.com/kb/323380
Look for heading: "How to Configure Forwarders"
0
 

Author Comment

by:Didsi
ID: 22709878
Ill give it a try when everyone on lunch! thank you
0
 

Accepted Solution

by:
Didsi earned 0 total points
ID: 22903119
Unfortunatly that did not work, however i have managed to resolve the problem. An ip address change seemed to help. Thanks for all suggestions
0

Featured Post

Highfive Gives IT Their Time Back

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

This is my 3rd article on SCCM in recent weeks, the 1st (http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/Windows_Server_2008/A_4466-A-beginners-guide-to-installing-SCCM2007-on-Windows-2008-R2-Server.html) dealing with installat…
Welcome to my series of short tips on migrations. Whilst based on Microsoft migrations the same principles can be applied to any type of migration. My first tip Migration Tip #1 – Source Server Health can be found listed in my profile here: http:…
Sending a Secure fax is easy with eFax Corporate (http://www.enterprise.efax.com). First, Just open a new email message.  In the To field, type your recipient's fax number @efaxsend.com. You can even send a secure international fax — just include t…
In this seventh video of the Xpdf series, we discuss and demonstrate the PDFfonts utility, which lists all the fonts used in a PDF file. It does this via a command line interface, making it suitable for use in programs, scripts, batch files — any pl…

760 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

22 Experts available now in Live!

Get 1:1 Help Now