Solved

To Configure Router for VPN, have tried but no logs or details for this

Posted on 2008-10-14
7
319 Views
Last Modified: 2012-05-05
I would like assistance in configuring the VPN part of the router. We have the other site ready but we have had to re-configure the router mentioned above, Tried testing the router using IPSEC, but no logs or details to help , any help would be welcomed,

Have steup and tried connecting via the Section VPN, and entering in the dial-out details, but does not seem to connect or provide any reason as to whay.
0
Comment
Question by:davewatkins42
  • 4
  • 3
7 Comments
 
LVL 2

Accepted Solution

by:
Carsontl earned 500 total points
ID: 22712900
Can you provide specifics?

Brand
Router
Router firmware version
How the VPN is going to connect
0
 

Author Comment

by:davewatkins42
ID: 22712978
Draytek Router

Model
 : Vigor2600 plus series annex A
Firmware Version
 : 2.5.6_UK
Build Date/Time
 : Mon Feb 21 17:14:4.5 2005
LAN MAC Address
 : 00-50-7F-2F-1F-64  

VPN Will be trying to connect vis IPSEC, as i said no no logs as to why not connecting, and or if i have configured this correctly

Thanks
0
 
LVL 2

Assisted Solution

by:Carsontl
Carsontl earned 500 total points
ID: 22713032
Draytek has a VPN guide set up on their website:

http://www.draytek.co.uk/support/router_faq.html#vpn

Hope this helps!
0
Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

 
LVL 2

Expert Comment

by:Carsontl
ID: 22713069
0
 

Author Comment

by:davewatkins42
ID: 22713938
Hi that has helped , so thanks for that, although still not getting any VPN connection, looks like i have configured correclty, so possible it other end the issue is, although that was already setup, so who knows!!
0
 
LVL 2

Expert Comment

by:Carsontl
ID: 22713990
It could be the other side if you've followed the instructions to the T
0
 

Author Closing Comment

by:davewatkins42
ID: 31505971
yes
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Trustworthy VPN (with a client that supports MAC's) 4 51
Free VPN for windows 4 66
l2tp tunnel from pc to router 14 86
ASA - RV130 VPN tunnel, cannot pass traffic 8 68
Overview Often, we set up VPN appliances where the connected clients are on a separate subnet and the company will have alternate internet connections and do not use this particular device as the gateway for certain servers or clients. In this case…
OpenVPN is a great open source VPN server that is capable of providing quick and easy VPN access to your network on the cheap.  By default the software is configured to allow open access to your network.  But what if you want to restrict users to on…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

772 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question