Solved

What are possible causes of Reset-I on a connection to a printer behind a FWSM interface?

Posted on 2008-10-14
2
423 Views
Last Modified: 2008-10-15
We have a new printer behind a FWSM FW interface.

Aall the correct ports are allowed and nothing  is denied for traffic between the print server and the printer.
The statics are properly set up and other devices behind this interface are reachable from outside.

However each inbound conn. from the print server is immediately torn down with  a TCP Reset-I
Clearly the printer doesn't want to talk to the print server - but how to figure out why?

thanks-
Lynne
0
Comment
Question by:LynneEllen
2 Comments
 
LVL 15

Accepted Solution

by:
Voltz-dk earned 125 total points
ID: 22718821
It doesn't sounds like it has anything to do with the firewall.  This sounds like a printer/print-server configuration problem really.
You should probably try to expand to some zone closer to the heart of that.

Perhaps the ports are configurable or something.. but I don't know too much about printers.
0
 

Author Comment

by:LynneEllen
ID: 22720028
Thanks.
That's pretty much what I thought, but wanted to sanity-check my conclusion...
0

Featured Post

Efficient way to get backups off site to Azure

This user guide provides instructions on how to deploy and configure both a StoneFly Scale Out NAS Enterprise Cloud Drive virtual machine and Veeam Cloud Connect in the Microsoft Azure Cloud.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Cisco Pix/ASA hairpinning The term, hairpinning, comes from the fact that the traffic comes from one source into a router or similar device, makes a U-turn, and goes back the same way it came. Visualize this and you will see something that looks …
This article assumes you have at least one Cisco ASA or PIX configured with working internet and a non-dynamic, public, address on the outside interface. If you need instructions on how to enable your device for internet, or basic configuration info…
When you create an app prototype with Adobe XD, you can insert system screens -- sharing or Control Center, for example -- with just a few clicks. This video shows you how. You can take the full course on Experts Exchange at http://bit.ly/XDcourse.
This video explains how to create simple products associated to Magento configurable product and offers fast way of their generation with Store Manager for Magento tool.

930 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

11 Experts available now in Live!

Get 1:1 Help Now