Solved

Configuring VLAN's

Posted on 2008-10-14
7
980 Views
Last Modified: 2012-06-27
We have several VLANs within our network. We have fiber comming into our building which connects to a netgear managed switch, I have configured several of the ports to be 'Trunk' ports (opening all VLANs) I ran a cable from one of the Trunk ports to a dell managed Switch and need some help configuring it.

For some reason I can get it to work, but I cannot web access it. I am not sure how to type the problem I am having but would like some help in terms of VLAN membership (tagged to a particular vlan) VLAN port settings, and I know I am missing something.
0
Comment
Question by:philtukey
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 4
  • 3
7 Comments
 
LVL 26

Expert Comment

by:Soulja
ID: 22715104
What type of Dell switch? Can you access it though the console port?

Here is a cli reference for dell. While it states for a specific model,  the command should work for your switch also, if it is a managed dell switch.

http://docs.us.dell.com/support/edocs/network/pc6024/en/cli/pdf/6024CLI4.pdf


0
 
LVL 1

Author Comment

by:philtukey
ID: 22715620
Dell PowerConnect 2724, yes I can access it through Port 1 but If I connect through that port I cannot surf the web.
0
 
LVL 26

Expert Comment

by:Soulja
ID: 22715881
Could you post the config. The port connecting to your netgear needs to be a set as a trunk also. You will also need to create the vlans on the dell switch.
0
Schedule a Tour of the ATEN booth at InfoComm 2017

Tour the ATEN booth to see the the Latest Addition to the Modular Matrix Switch Series, New 4K HDMI Over IP Extender and more! Enter ATEN's Ultimate Giveaway Sweepstakes for a chance to win one of several great prizes, including an ATEN US7220 2-Port Thunderbolt 2 Sharing Switch!

 
LVL 1

Author Comment

by:philtukey
ID: 22716216
Config for the Trunk Port on the Netgear
interface  0/24
vlan participation exclude 1
vlan participation include 550
vlan tagging 550
vlan participation include 3901
vlan tagging 3901
vlan participation include 3902
vlan tagging 3902
vlan participation include 3903
vlan tagging 3903
vlan participation include 3904
vlan tagging 3904
vlan participation include 3905
vlan tagging 3905
vlan participation include 3906
vlan tagging 3906
vlan participation include 3907
vlan tagging 3907
vlan participation include 3908
vlan tagging 3908
vlan participation include 3909
vlan tagging 3909
exit

I also have attached a word Doc with some screen shots of the dell switch.
Dell-VLAN-Config.doc
0
 
LVL 1

Author Comment

by:philtukey
ID: 22843076
We decided to not do VLAN's.
0
 
LVL 1

Author Comment

by:philtukey
ID: 22843079
Thank you for your help
0
 
LVL 26

Accepted Solution

by:
Soulja earned 500 total points
ID: 22843144
On the dell screen shot, the port that you want to have as a trunk needs to be set to tagged.  For the other ports leave untagged, but select what vlan you want the specific ports to be in on the Vlan Port Settings page. Sorry for the late response. I somehow missed the email notifying me of your comment.
0

Featured Post

Turn your laptop into a mobile console!

The CV211 Laptop USB Console Adapter provides a direct Laptop-to-Computer connection for fast and easy remote desktop access with no software to install.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I eventually solved a perplexing problem setting up telnet for a new switch.  I installed a new Cisco WS-03560X-24P switch connected to an existing Cisco 4506 running a WS-X4013-10GE Sup II-Plus. After configuring vlans and trunking,  I could no…
Arrow Electronics was searching for a KVM  (Keyboard/Video/Mouse) switch that could display on one single monitor the current status of all units being tested on the rack.
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…
In this brief tutorial Pawel from AdRem Software explains how you can quickly find out which services are running on your network, or what are the IP addresses of servers responsible for each service. Software used is freeware NetCrunch Tools (https…

691 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question