Instaling IPMP on the host domain

I am tring to set-up IPMP in Ldom 1.0.3 on the host domain. I need that in order that all the domains get IPMP without set-up individual IPMP on each domain.

I have set-up the virtual switch using:
ldm add-vsw primary-vsw0 primary
I plumb the vsw0 with the following setings:

bge0: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 1500 index 2
        inet 192.168.1.65 netmask ffffff00 broadcast 192.168.1.255
        groupname Test_1
        ether 0:21:28:10:97:0
bge1: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 1500 index 3
        inet 0.0.0.0 netmask ff000000 broadcast 0.255.255.255
        groupname Test_1
        ether 0:21:28:10:97:1
vsw0: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 1500 index 4
        inet 192.168.1.72 netmask ffffff00 broadcast 192.168.1.255
        ether 0:14:4f:f8:64:58

I do not know how to set up the routes to make vsw0 comunicate with the network.
smurguAsked:
Who is Participating?
 
jgiordanoConnect With a Mentor Commented:
I only did ldoms a few times; but I believe you should create another vsw1 and bind it to bge1. Assighn it to the ldom.

/opt/SUNWldm/bin/ldm add-vsw net-dev=bge1 primary-vsw1 primary

ldm add-vnet vnet1 primary-vsw0 myldom1
ldm add-vnet vnet2 primary-vsw1 myldom1

when the ldom starts set up vnet1 and vnet2 as ipmp failover
0
All Courses

From novice to tech pro — start learning today.