Solved

ISA 2006 & WCCP

Posted on 2008-10-14
2
1,356 Views
Last Modified: 2012-05-05
Does Microsoft ISA 2006 support WCCP?  I've found all sorts of documents regarding ISA 2000 & ISA 2003 but nothing on 2006.

If not (and I wouldn't be surprised), is there some similar method for Cisco router based redirection of web traffic?
0
Comment
Question by:RPPreacher
  • 2
2 Comments
 
LVL 51

Accepted Solution

by:
Keith Alabaster earned 500 total points
ID: 22715501
WCCP is a Cisco protocol anyway so no, ISA does not support it. The ISA Enterprise version supports CARP which is a similar approach but thats about as far as it goes really.

http://articles.techrepublic.com.com/5100-10878_11-6175637.html
This gives an overview for Cisco routers

0
 
LVL 51

Expert Comment

by:Keith Alabaster
ID: 22715722
Thank you :)
0

Featured Post

Portable, direct connect server access

The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Hello , This is a short article on how would you go about enabling traceoptions on a Juniper router . Traceoptions are similar to Cisco debug commands but these traceoptions are implemented in Juniper networks router . The following demonstr…
There are two basic ways to configure a static route for Cisco IOS devices. I've written this article to highlight a case study comparing the configuration of a static route using the next-hop IP and the configuration of a static route using an outg…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

829 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question