Solved

VLAN problem

Posted on 2008-10-14
3
568 Views
Last Modified: 2009-02-25
I have 2 main switches 172.16.1.2 and 172.16.1.3
172.16.1.2 has only 1 VLAN
172.16.1.3 has 2 working VLAN and i am adding the 3rd one to it
172.16.1.1/24 and 172.16.5.1 /24 and now i am trying to add 172.16.10.1/24 to it

The switches are also act as gateway 172.16.1.2 and 172.16.1.3 for the first VLAN and 172.16.5.1 for the secondary VLAN

On the second switch(172.16.1.3) which hook up to 172.16.1.2.
First VLAN VLAN
Name:  Default  
IP Address    172.16.1.3
Netmask   255.255.255.0
802.1Q Tag  : 1
Spanning Tree Domain  s0
QoS Profile  QP1

Second working VLAN
VLAN Name:  Worker  
IP Address    172.16.5.1
Netmask   255.255.255.0
802.1Q Tag   Untagged (Internal tag 4092)
Spanning Tree Domain  None
QoS Profile  QP1

New VLAN :not working yet.
VLAN Name:  New
IP Address    172.16.10.1
Netmask   255.255.255.0
802.1Q Tag  : Untagged (Internal tag 4091)
Spanning Tree Domain  None
QoS Profile  QP1
 
After i untagged a port i was able to ping 172.16.10.1 and 172.16.1.3 but cant not ping the first switch 172.16.1.2. I can also ping 172.16.5.1 but nothing else pass that. I got the Cisco pix to allow all the traffic

name 172.16.10.1 NEWGateway
name 172.16.10.0 NEW
pdm location NEWGateway 255.255.255.255 inside
pdm location NEW 255.255.255.0 inside
access-list inside_access_in permit ip NEW 255.255.255.0 any
 

 
0
Comment
Question by:moonzappa
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 33

Accepted Solution

by:
MikeKane earned 500 total points
ID: 22715861
Can you provide more detail as to the setup.  

#1) Where is your trunk port.
#2) On the Firewall, are you tagging the VLANs?  
#3) Where are you routing the VLANS?  at the switch?    
0
 

Author Comment

by:moonzappa
ID: 22723776
1) i dont see any trunk port but it must be port 3 and 4 before these are shared port which connecting the 2 switches

2) i am not sure what you mean? i do have a vlan (subnet) defined on the firewall hosts

3) i am routing the vlan at the firewall though 172.16.1.3 (the secondary switch)
0
 
LVL 33

Expert Comment

by:MikeKane
ID: 22933400
Please post the switch code to continue - Thanks.
0

Featured Post

NFR key for Veeam Backup for Microsoft Office 365

Veeam is happy to provide a free NFR license (for 1 year, up to 10 users). This license allows for the non‑production use of Veeam Backup for Microsoft Office 365 in your home lab without any feature limitations.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I recently attended Cisco Live! in Las Vegas, a conference that boasted over 28,000 techies in attendance, and a week of hands-on learning hosted by a solid partner with which Concerto goes to market.  Every year, Cisco displays cutting-edge technol…
Powerful tools can do wonders, but only in the right hands.  Nowhere is this more obvious than with the cloud.
Both in life and business – not all partnerships are created equal. As the demand for cloud services increases, so do the number of self-proclaimed cloud partners. Asking the right questions up front in the partnership, will enable both parties …
Both in life and business – not all partnerships are created equal. Spend 30 short minutes with us to learn:   • Key questions to ask when considering a partnership to accelerate your business into the cloud • Pitfalls and mistakes other partners…
Suggested Courses
Course of the Month8 days, 6 hours left to enroll

617 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question