I have two subnets, 192.168.0.0/24 and 192.168.1.0/24. They are in two separate buildings that are about 30 feet apart and are currently connected via a VPN tunnel between the two Linksys RV042 Routers. I have setup an access point on the 192.168.0.0/24 side and a wireless bridge on the 192.168.1.0/24 side. The bridge is able to establish a connection with the access point - no problem. What I would like to accomplish is to have all traffic go through the wireless bridge between the two subnets. How do I configure the RV042's to do such a thing? Do I add static routes to both of them, just one, or not even bother with the RV042's. Do I need a router on each end to prevent unnecessary traffic from going across the bridge? Any help would be greatly appreciated.