Solved

Solaris - SUN Cluster 3.2  error                clquorum:  (C192716) I/O error.

Posted on 2008-10-14
3
2,335 Views
Last Modified: 2013-12-21
bash-3.00# ./clsetup
  >>> Initial Cluster Setup <<<

    This program has detected that the cluster "installmode" attribute is
    still enabled. As such, certain initial cluster setup steps will be
    performed at this time. This includes adding any necessary quorum
    devices, then resetting both the quorum vote counts and the
    "installmode" property.

    Please do not proceed if any additional nodes have yet to join the
    cluster.
    Is it okay to continue (yes/no) [yes]?  
    Do you want to add any quorum devices (yes/no) [yes]?  

    Following are supported Quorum Devices types in Sun Cluster. Please
    refer to Sun Cluster documentation for detailed information on these
    supported quorum device topologies.

    What is the type of device you want to use
        1) Directly attached shared disk
        2) Network Attached Storage (NAS) from Network Appliance
        3) Quorum Server

        q) Return to the quorum menu
    Option:  1



  >>> Add a SCSI Quorum Disk <<<

    A SCSI quorum device is considered to be any Sun Cluster supported
    attached storage which connected to two or more nodes of the cluster.
    Dual-ported SCSI-2 disks may be used as quorum devices in two-node
    clusters. However, clusters with more than two nodes require that
    SCSI-3 PGR disks be used for all disks with more than two node-to-disk
    paths.
    You can use a disk containing user data or one that is a member of a
    device group as a quorum device
    For more information on supported quorum device topologies, see the
    Sun Cluster documentation.
    Is it okay to continue (yes/no) [yes]?  
    Which global device do you want to use (d<N>)?  d29
    Is it okay to proceed with the update (yes/no) [yes]?  

clquorum add d29
clquorum:  (C192716) I/O error.

Command failed.
Press Enter to continue:  




I get this error on both nodes. d29 is on both servers and has been labeled
0
Comment
Question by:cohare
  • 2
3 Comments
 
LVL 22

Accepted Solution

by:
blu earned 500 total points
ID: 22766902
Three things spring to mind. One, that the disk doesn't exist. You should try running scgdevs to create the necessary devices.

The next possibility is that the disk exists but is not shared.

And the last thought is that the disk is indeed having hardware problems. Check the messages file for this.
0
 

Author Comment

by:cohare
ID: 22794686
One node, the master did not have a vote. I had to run the following

bash-3.00# ./clquorum enable   master_node
0
 

Author Closing Comment

by:cohare
ID: 31506114
thanks for the help
0

Featured Post

Courses: Start Training Online With Pros, Today

Brush up on the basics or master the advanced techniques required to earn essential industry certifications, with Courses. Enroll in a course and start learning today. Training topics range from Android App Dev to the Xen Virtualization Platform.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this article, I provide some information on storage disks which go into calculations that will help you figure out how much Input/output Operations Per Second (IOPS) your disk subsystem can deliver. To effectively size & tune up applications l…
Every server (virtual or physical) needs a console: and the console can be provided through hardware directly connected, software for remote connections, local connections, through a KVM, etc. This document explains the different types of consol…
Learn several ways to interact with files and get file information from the bash shell. ls lists the contents of a directory: Using the -a flag displays hidden files: Using the -l flag formats the output in a long list: The file command gives us mor…
Learn how to get help with Linux/Unix bash shell commands. Use help to read help documents for built in bash shell commands.: Use man to interface with the online reference manuals for shell commands.: Use man to search man pages for unknown command…

813 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

15 Experts available now in Live!

Get 1:1 Help Now