Solved

VPN Nat

Posted on 2008-10-15
8
249 Views
Last Modified: 2012-05-05
Hi Experts,

We have a puzzling VPN issue.

We have a Cisco VPN COncentrator We want to be able to print to an printer on a 3rd party network is it possible to add this printer to a windows server with an TCP/IP conection using this 3rd party remote IP assigned yo it?
Then send the print job to the Concentrator translate the IP to a remote  NAt'd IP and have the print job print to the remote printer that is on a 3rd part network?

Is this possible?
0
Comment
Question by:talltree
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 4
  • 4
8 Comments
 
LVL 10

Expert Comment

by:kyleb84
ID: 22727003
So to be clear.

- You have Site 1 and Site 2.
- Your printer is on Site 2.
- You want to print to this printer from Site 1
- Site 2 is connected to Site 1 via the VPN Concentrator located at Site 1?
0
 

Author Comment

by:talltree
ID: 22727084
Yes,

With Nated IP's
0
 
LVL 10

Accepted Solution

by:
kyleb84 earned 500 total points
ID: 22727118
NATed IPs?

Be more specific...

- Site 2's network is 1:1 NATed into a pool of Site 1's IPs?
- Site 2 and Site 1 both have PAT enabled?
- Site 2's VPN endpoint in Site 1 has only 1 IP and is MANY:1 NATed?
0
Windows Server 2016: All you need to know

Learn about Hyper-V features that increase functionality and usability of Microsoft Windows Server 2016. Also, throughout this eBook, you’ll find some basic PowerShell examples that will help you leverage the scripts in your environments!

 

Author Comment

by:talltree
ID: 22727137
Site 2's network is 1:1 NATed into a pool of Site 1's IPs?
0
 
LVL 10

Expert Comment

by:kyleb84
ID: 22727149
If that's the case, you should quite easily be able to just add the printer like your said.
0
 

Author Comment

by:talltree
ID: 22727191
the NAted IP in the printer or the real 3rd party IP on the printer then Nat'd it in the Concentrator?

Is it true that you can not route a 3rd part IP without Nat'ing it?

Thanks
0
 
LVL 10

Expert Comment

by:kyleb84
ID: 22727223
What do you mean by 3rd party IP?

Can you post the details of the network ranges of both sites, and the Printer's real IP address.
0
 

Author Comment

by:talltree
ID: 22727541
Site 2 Printer IP 205.181.160.2(static reall IP)
Site 1 Server IP 10.255.50.12(add Site 2 Printer IP 205.181.160.2 send the print job to the VPN Concentrator translate the real IP to a Nat'ed Ip so it can be routed in the tunnel then try to print ot the Site 2 printer

The 205.0.0.0 subnet is a 3rd party network before the Nat translation not on our private IP subnet
is this possible witout Nating the 205.181.160.2?

Thanks
0

Featured Post

Manage your data center from practically anywhere

The KN8164V features HD resolution of 1920 x 1200, FIPS 140-2 with level 1 security standards and virtual media transmissions at twice the speed. Built for reliability, the KN series provides local console and remote over IP access, ensuring 24/7 availability to all servers.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Quality of Service (QoS) options are nearly endless when it comes to networks today. This article is merely one example of how it can be handled in a hub-n-spoke design using a 3-tier configuration.
Exchange server is not supported in any cloud-hosted platform (other than Azure with Azure Premium Storage).
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

697 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question