Solved

Cisco 2821 router E1 module

Posted on 2008-10-16
6
1,178 Views
Last Modified: 2012-05-07
I have a 2821 router with 4 HWIC port and one evdm module slot. I would like to know which PRI E1 card is supported in the HWICslot?
0
Comment
Question by:supportpro
  • 2
  • 2
  • 2
6 Comments
 
LVL 22

Expert Comment

by:Rick Hobbs
ID: 22728638
NM-1CE1T1-PRI
0
 
LVL 22

Expert Comment

by:Rick Hobbs
ID: 22728643
That is a 1 port.  NM-2CE1T1-PRI is a two port.
This is the info sheet: http://www.cisco.com/en/US/prod/collateral/modules/ps2797/product_data_sheet09186a0080189f95.html
0
 

Author Comment

by:supportpro
ID: 22728662
Can i have a solution for HWIC slot rather than NM slot
0
Create the perfect environment for any meeting

You might have a modern environment with all sorts of high-tech equipment, but what makes it worthwhile is how you seamlessly bring together the presentation with audio, video and lighting. The ATEN Control System provides integrated control and system automation.

 
LVL 1

Expert Comment

by:smshah78
ID: 22729075
HWIC-1CE1T1-PRI  - 1-port Channelized E1/T1/ISDN PRI HWIC
HWIC-2CE1T1-PRI  - 2-port Channelized E1/T1/ISDN PRI HWIC

0
 
LVL 1

Accepted Solution

by:
smshah78 earned 500 total points
ID: 22729081
0
 

Author Closing Comment

by:supportpro
ID: 31629534
answer helped
0

Featured Post

Create the perfect environment for any meeting

You might have a modern environment with all sorts of high-tech equipment, but what makes it worthwhile is how you seamlessly bring together the presentation with audio, video and lighting. The ATEN Control System provides integrated control and system automation.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
2 routers, one cable modem 10 106
Fortigate 100D NTP Issue 4 111
route-map permit with a number 1 37
ip igmp join-group 8 43
In this tutorial I will show you with short command examples how to obtain a packet footprint of all traffic flowing thru your Juniper device running ScreenOS. I do not know the exact firmware requirement, but I think the fprofile command is availab…
In the world of WAN, QoS is a pretty important topic for most, if not all, networks. Some WAN technologies have QoS mechanisms built in, but others, such as some L2 WAN's, don't have QoS control in the provider cloud.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

820 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question