Solved

How to identify that a integrated LAN is damaged ?

Posted on 2008-10-16
5
526 Views
Last Modified: 2013-11-09
HI

I would like to know if there is a way (software, hardware, etc.) to test an integrated LAN Card in order to know if it´s damaged physically.

Under device manager the LAN appears with a yellow icon that says: "The device is not working properly".

Regards
0
Comment
Question by:dimensionav
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
  • 2
5 Comments
 
LVL 12

Expert Comment

by:alikaz3
ID: 22732733
Much more likely that you have a driver problem with the lan card, have you tried reinstalling the driver?
0
 

Author Comment

by:dimensionav
ID: 22733082
alikaz3:

Yes we did that but didn´t work, it seems that stills showing the previous error.
0
 
LVL 12

Expert Comment

by:alikaz3
ID: 22733110
what onboard chip is it? Give me the model number and I will take a look and see if there is a diagnostic utility available for it.
0
 

Author Comment

by:dimensionav
ID: 22736813
As far as I know is an Intel 845GEV MB, but I let you know that the machine was formatted and everything seem to be working well.

In any case I would like to know if there is an utility for LAN NICs/Hardware diagnostics.
Thanks.
0
 
LVL 92

Accepted Solution

by:
nobus earned 125 total points
ID: 22738333
0

Featured Post

Independent Software Vendors: We Want Your Opinion

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

When posting a question about a Cisco ASA, Cisco Router or Cisco Switch, it can aid diagnosis if a suitably sanitised copy of the config is provided. It is much better to leave as much of the configuration as original as possible, as it could be tha…
#Citrix #Netscaler #MSSQL #Load Balance
Michael from AdRem Software outlines event notifications and Automatic Corrective Actions in network monitoring. Automatic Corrective Actions are scripts, which can automatically run upon discovery of a certain undesirable condition in your network.…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…

719 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question