Solved

Configure Netgear FVS318 ProSafe VPN Firewall to allow visibility of 6 cameras online

Posted on 2008-10-17
2
1,233 Views
Last Modified: 2013-11-08
  Good morning everyone,
        I have a netgear FVS318 Prosafe VPN Firewall on a public IP address and 6 IP based survailence cameras with web interfaces and public IP's for each. I have the Firewall online and running with remote management capabilities. I have setup rules in the firewall that allow my to remote into the servers on the network using port 3389 and they are working. The problem that i'm having is how to setup the rules so that each public IP is pointing to the cameras internal private IP. Any help would be greatly appreciated! If you need any more information i would be happy to provide it.
       
0
Comment
Question by:casper114
2 Comments
 
LVL 32

Accepted Solution

by:
dpk_wal earned 500 total points
Comment Utility
I see there are three FVS318 routers available [v1, v2 and v3] which one do you have. As I understand Netgear calls 1-1 NAT as multi NAT and is only available in FVX538 or FVS338 router, here's what multi-NAT means
 [http://kbserver.netgear.com/inquira/default.asp?ui_mode=answer&prior_transaction_id=410180&action_code=5&highlight_info=16777250,375,421&turl=http%3A%2F%2Fkbserver.netgear.com%2Fkb_web_files%2FN101448.asp&answer_id=59105836#__highlight]:

Multi-NAT is the term used by NETGEAR to describe creating more than one public IP address for your network. This new feature is described in Using Multi-NAT with the FVX538 or FVS338 Firewall. Multi-NAT is used in the situation when your ISP provides you with a number of public IP addresses, and you want to use them to provide access from Internet to multiple internal servers. (Regular NAT translates one public IP address  on a single port to a private IP on a single port  if you have multiple private servers listening on the same port, one-to-one NAT won't accomodate all of them). Multi NAT assigns one of the public IPs to the WAN interface of the router; then Multi-NAT is used for the other public IPs, and with them NATed to multiple internal IP addresses.

It appears that multi-NAT is not available in FVS318; can you confirm this. If it is not available then what you wish would not be possible; otherwise we would be able to configure multi-NAT.

Thank you.
0
 

Author Closing Comment

by:casper114
Comment Utility
Right on the money! Thank you!
0

Featured Post

Enabling OSINT in Activity Based Intelligence

Activity based intelligence (ABI) requires access to all available sources of data. Recorded Future allows analysts to observe structured data on the open, deep, and dark web.

Join & Write a Comment

We sought a budget ($5,000) firewall solution that would provide all the performance we needed with no single point of failure.  Hosting a SAAS web application in our datacenter, it was critical that we find a way to keep connectivity up and inbound…
This video teaches viewers how to process images for a time-lapse video. Programs required: Adobe Lightroom, Adobe After Effects, Video Editing Program. In Adobe Lightroom: Import sequence image files into Adobe Lightroom: Develop settings of an I…
In this seventh video of the Xpdf series, we discuss and demonstrate the PDFfonts utility, which lists all the fonts used in a PDF file. It does this via a command line interface, making it suitable for use in programs, scripts, batch files — any pl…

772 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

10 Experts available now in Live!

Get 1:1 Help Now