Solved

How do DTech4003 Multicard  reader  audio cable pins fit into normal motherboard front panel audio connetor

Posted on 2008-10-17
5
1,134 Views
Last Modified: 2013-11-09
Can I locate a diagram that shows how to configure the audio cable strap of the DTech DT 4003 multi card reader with the normal 10 socket  front  audio connector on a motherboard? It's strap is as follows
Flat white (various red codings) audio cable strap ( including (mic-r&l;front r&l; Rearr&l; bass;center;ground))  and these do not  match normal mobo diagrams of front panel audio connector sockets.
The panel front includes mic in(pink); rear out;(green); front out(blue; Cen-bass (orange) 3.5mm sockets
0
Comment
Question by:kinerang
  • 3
  • 2
5 Comments
 
LVL 92

Expert Comment

by:nobus
ID: 22747410
it should be listed in your DTech4003 Multicard  reader   manual
0
 

Author Comment

by:kinerang
ID: 22747733
Unfortunately no such manual was with the device. I've just checked the box again.
0
 
LVL 92

Accepted Solution

by:
nobus earned 500 total points
ID: 22747808
0
 

Author Closing Comment

by:kinerang
ID: 31507385
Thanks for the link I have used it to email the DTECH "overseas email" section and explained the need foe a diagram. If I get nowhere in the next few days I may need to return to this forum to get some other help. However in the mean time thanks heaps!!
0
 
LVL 92

Expert Comment

by:nobus
ID: 22751271
>>  The panel front includes mic in(pink); rear out;(green); front out(blue; Cen-bass (orange) 3.5mm sockets   <<  after re-reading this seems the front panel itself - but you should connect it to the motherboard audio connector  imho
what mobo do you have ?
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

When I recently replaced my image transfer kit on my office HP color laserjet 5550dn printer, I had a slight problem.  The left bracket that holds the transfer kit got stuck in the upright locked position instead of being at a 45 degree angle facing…
When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…
With Secure Portal Encryption, the recipient is sent a link to their email address directing them to the email laundry delivery page. From there, the recipient will be required to enter a user name and password to enter the page. Once the recipient …

770 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question