Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people, just like you, are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
Solved

Cisco 7301 Gig port MTU adjust

Posted on 2008-10-20
1
713 Views
Last Modified: 2008-10-21
I have two 7301s configured for PPPoE VPDN  as LAC - LNS.
These are directly connected using a Gig port on each 7301.

Can I increase the MTU for the ports so that I can carry PPP payload of more than 1500 bytes without fragmenting ?

Can VPDN / L2TP be configured to enable the transport of payloads larger than 1500 without fragmentation ?
0
Comment
Question by:newallhunter
1 Comment
 
LVL 10

Accepted Solution

by:
kyleb84 earned 250 total points
ID: 22763219
Easy:

interface Vlan1
 mtu 3000

-or-

interface Gig1/0
 mtu 1600

Just make sure that the MTU size it the same on the other end of the cable :P
0

Featured Post

Free Tool: IP Lookup

Get more info about an IP address or domain name, such as organization, abuse contacts and geolocation.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
iPad Won't Connect 16 95
What is CPU in "RP/0/RSP0/CPU0:router#"? 6 63
Router disappearing from network on one pc 18 34
Public IP Address - Subnet 4 35
In this tutorial I will show you with short command examples how to obtain a packet footprint of all traffic flowing thru your Juniper device running ScreenOS. I do not know the exact firmware requirement, but I think the fprofile command is availab…
Creating an OSPF network that automatically (dynamically) reroutes network traffic over other connections to prevent network downtime.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

839 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question