Solved

Server Agent Event Error: SNMP TRAP 6027 in CPQHLTH.MIB

Posted on 2008-10-20
11
28,379 Views
Last Modified: 2013-12-02
I rebooted my HP server and now I keep getting this message every so often.... I am not to sure if its rebooting on its own or not now... But the message states this: System Information Agent: Health: Post errors were detected. One or more Power-On-Self-Test errors were detected during server startup (SNMP TRAP: 6027 in CPQHLTH.MIB)...... What does this mean.... I look in the event viewer for more errors and I don't see anything.... So please help me understand why I am getting this, also is my server just rebooting all the time? I don't think it is because I keep getting a pop up that says restart now or later due to an update I have done on the server, but I haven't rebooted it because I keep getting these error messages.... Please help.......

Thanks
0
Comment
Question by:X_Help
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 6
  • 5
11 Comments
 
LVL 22

Expert Comment

by:65td
ID: 22760271
Review the IML.
The IML viewer is located under START-PROGRAMS - HP System Tools - HP Proliant Integrated Management Log viewer
0
 

Author Comment

by:X_Help
ID: 22760440
I did and it only shows issues back in 01/18/08 but nothing current as of todays date??
0
 
LVL 22

Expert Comment

by:65td
ID: 22763106
Has a version control been run against this box?
System firmware and drivers OK?
0
Free NetCrunch network monitor licenses!

Only on Experts-Exchange: Sign-up for a free-trial and we'll send you your permanent license!

Here is what you get: 30 Nodes | Unlimited Sensors | No Time Restrictions | Absolutely FREE!

Act now. This offer ends July 14, 2017.

 

Author Comment

by:X_Help
ID: 22763204
not to sure what Version Control means or how to run it but I diagnosed the HDD and the box and everything is good to go... .No failures or anything
0
 
LVL 22

Expert Comment

by:65td
ID: 22765966
Version control is part of Systems management home page on the local server, can download from HP the agents and version control are in packages called PSP's see hp link below:
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3288134&lang=en&cc=ca&prodTypeId=15351&prodSeriesId=1121516&taskId=135

If systems management is install should be able to contact the server agents via https://servername or IP:2381
0
 
LVL 22

Expert Comment

by:65td
ID: 22765985
0
 

Author Comment

by:X_Help
ID: 22769823
Ok so I did that and it shows everything good to go, I even did a scan on my HDD and they have no errors as well, any thing else it might be??
0
 
LVL 22

Expert Comment

by:65td
ID: 22772709
could try downloading and make a firmware update cd does it all drives, system and controller firmware.

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=ca&prodTypeId=15351&prodSeriesId=1121516&prodNameId=3288134&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-3d1aaa0b48c04b628789e598d3

What model server and controller are being used?
0
 

Author Comment

by:X_Help
ID: 22779196
I have a DL380 G4 and Version Control Agent 2.1.10.801
0
 
LVL 22

Accepted Solution

by:
65td earned 250 total points
ID: 22840381
Yes that link is for the latest BIOS / firmware CD, download burn image to a CD, reboot server with disk in drive.
0

Featured Post

Free NetCrunch network monitor licenses!

Only on Experts-Exchange: Sign-up for a free-trial and we'll send you your permanent license!

Here is what you get: 30 Nodes | Unlimited Sensors | No Time Restrictions | Absolutely FREE!

Act now. This offer ends July 14, 2017.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

The 6120xp switches seem to have a bug when you create a fiber port channel when you have a UCS fabric interconnects talking to them.  If you follow the Cisco guide for the UCS, the FC Port channel will never come up and it will say that there are n…
Moving your enterprise fax infrastructure from in-house fax machines and servers to the cloud makes sense — from both an efficiency and productivity standpoint. But does migrating to a cloud fax solution mean you will no longer be able to send or re…
In this video, viewers are given an introduction to using the Windows 10 Snipping Tool, how to quickly locate it when it's needed and also how make it always available with a single click of a mouse button, by pinning it to the Desktop Task Bar. Int…
Michael from AdRem Software outlines event notifications and Automatic Corrective Actions in network monitoring. Automatic Corrective Actions are scripts, which can automatically run upon discovery of a certain undesirable condition in your network.…

690 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question