Solved

Cisco 3560 Power Issue

Posted on 2008-10-21
2
1,558 Views
Last Modified: 2012-06-27
I have a Cisco 3560 running at a remote location. Due to power outage,the power connection shifted to a RPS. Since no resource is available onsite,is there a way wherein we could power on the original powersupply remotely using CLI?

Since the environment is highly business critical, will it seamlessly get transferred to the original power supply?

"sh env power" displays "Power is Faulty"

Kindly advise.
0
Comment
Question by:Gurinders
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 5

Accepted Solution

by:
rexxus earned 500 total points
ID: 22776051
From:

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps7148/ps7130/prod_qas0900aecd805bbf21.html

Unless the 3560 is an "E" series there is a chance that the switch will reboot when reverting back to it's power supply.  If the switch is an "E" series they are supposed to fail back to internal power when it returns, if it hasn't done so you're looking at a faulty power supply.

With the message you're seeing in the sh env power, I would hazard a guess that there may be a problem with the internal power supply and best bet would be to leave it until someone can get to site with a replacement power supply.

0

Featured Post

Manage your data center from practically anywhere

The KN8164V features HD resolution of 1920 x 1200, FIPS 140-2 with level 1 security standards and virtual media transmissions at twice the speed. Built for reliability, the KN series provides local console and remote over IP access, ensuring 24/7 availability to all servers.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
CCNA lab 6 53
Changing VLAN information 3 36
VTP Setup 4 22
Cisco Switch VLAN voice and Data 2 49
The worst thing when starting a new job is when the previous Network Administrator left behind no documentation. How do you get into the devices? If you've been in this situation or just accidently mistyped your password, this article will hopefully…
This tutorial will go through the steps required to write a script that will back up the configuration settings of a HP-ProCurve switch. You will need to get the following things to follow this tutorial: Telnet Scripting Tool e.g. TST10.exe …
How to Install VMware Tools in Red Hat Enterprise Linux 6.4 (RHEL 6.4) Step-by-Step Tutorial

696 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question