tjie
asked on
How to configure Routing and Remote Access?
Hi,
1) I have a system (Please see the attachment)
2) Please see the RRAS1 (Routing and Remote Access Server)
3)This server is connected to LAN 3 and LAN 4
4) I go to Start> All Programs > Administrative Tools > Routing and Remote Access
5) I highlight RRAS1
6) I right click the "Configure Routing and Remote Access"
7) I expand the "IP Routing"
8) I highlight " General "
9) On the right side, i see "LAN 3" and "LAN 4" (Both types are "dedicated", "Up" and "Operational")
10) My questions: How to configure this Routing and Remote Access service to ROUTE between LAN 3 and LAN 4?
11) Thank you
Tjie
ISA001.jpg
1) I have a system (Please see the attachment)
2) Please see the RRAS1 (Routing and Remote Access Server)
3)This server is connected to LAN 3 and LAN 4
4) I go to Start> All Programs > Administrative Tools > Routing and Remote Access
5) I highlight RRAS1
6) I right click the "Configure Routing and Remote Access"
7) I expand the "IP Routing"
8) I highlight " General "
9) On the right side, i see "LAN 3" and "LAN 4" (Both types are "dedicated", "Up" and "Operational")
10) My questions: How to configure this Routing and Remote Access service to ROUTE between LAN 3 and LAN 4?
11) Thank you
Tjie
ISA001.jpg
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.