Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people, just like you, are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
Solved

Subversion - svn:// protocol : connection closed unexpectedly problem

Posted on 2008-10-22
4
2,428 Views
Last Modified: 2013-12-19
Hi,

I got Subversion installed on couple of Unix boxes. When I try subversion using svn:// on the first unix box it works great and shows all directories and files that are under version control

svn ls svn://server1/Repo1

But when I give the same command on the other box which has the same version of Subversion installed I got the following error.

svn ls svn://server2/Repo2

svn: Connection closed unexpectedly

I checked to make sure all the properties/profiles are same on both the unix boxes.

I googled a lot to find out if I can get some solution, but no luck.

Please let me know what is going on here.

Thanks!
0
Comment
Question by:hSindhu
  • 2
  • 2
4 Comments
 
LVL 62

Expert Comment

by:gheist
ID: 22785742
/etc/hosts.allow and /etc/hosts deny must be examined.
Can you connect with command line svn from good server to problem server.
0
 

Author Comment

by:hSindhu
ID: 22789629
Hello Gheist,

I tried to connect using command line svn from good server to the problem server and still see the message

"connection closed unexpectedly"

Any other thoughts or ideas ? I am really struck with this problem.

Thanks
0
 
LVL 62

Expert Comment

by:gheist
ID: 22794443
It looks like tcp wrappers configured in /etc/hosts.allow|hosts.deny

I hope no firewall or selinux involved.
0
 

Accepted Solution

by:
hSindhu earned 0 total points
ID: 22798507
Hello Gheist,

It was the problem with inetd.conf entries. Subversion using SVN protocol does not like to have an entry inside inetd.conf file. Once I removed the same, it fixed the problem.

Thanks for your suggestions gheist.

0

Featured Post

Free Tool: Port Scanner

Check which ports are open to the outside world. Helps make sure that your firewall rules are working as intended.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

790 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question