<div>
SDM is the web based config utility provided by cisco but it dosent look like the 4006 will support it because the highest IOS version for the 4000 series is 12.1(22b) and SDM requires at least 12.3(8).<br />
<br />
here is the link to the sdm doc with requirments<br />
<a href="http://www.cisco.com/en/US/prod/collateral/routers/ps5318/product_data_sheet0900aecd800fd118.html" rel="ugc">http://www.cisco.com/en/US/prod/collateral/routers/ps5318/product_data_sheet0900aecd800fd118.html</a><br />

</div>


SDM is the web based config utility provided by cisco but it dosent look like the 4006 will support it because the highest IOS version for the 4000 series is 12.1(22b) and SDM requires at least 12.3(8).

here is the link to the sdm doc with requirments
http://www.cisco.com/en/US/prod/collateral/routers/ps5318/product_data_sheet0900aecd800fd118.html [http://www.cisco.com/en/US/prod/collateral/routers/ps5318/product_data_sheet0900aecd800fd118.html]


<div>
The latest IOS for the Catalyst 4006 is 8.4.XX. &nbsp;I think you are thinking of a router? &nbsp;Am I wrong?
</div>


The latest IOS for the Catalyst 4006 is 8.4.XX.  I think you are thinking of a router?  Am I wrong?

<div>
Ah sorry you are on CatOS i was assuming you were running IOS.
</div>


Ah sorry you are on CatOS i was assuming you were running IOS.

<div>
<div class="content wysiwyg-content">
I am trying to configure the Cisco Catalyst 4006 to be configured via the web, is there a way to enable this?
</div>
</div>


I am trying to configure the Cisco Catalyst 4006 to be configured via the web, is there a way to enable this?

Does the Catalyst 4006 have a web config utility?

A switch is a device that filters and forwards packets of data between LAN segments. Switches operate at the data link layer or the network layer of the Open Systems Interconnection (OSI) Reference Model and therefore support any packet protocol. LANs that use switches to join segments are called switched LANs or, in the case of Ethernet networks, switched Ethernet LANs. A hub is a connection point for devices in a network. Hubs are commonly used to connect segments of a LAN. A hub contains multiple ports; when a packet arrives at one port, it is copied to the other ports so that all segments of the LAN can see all packets.