Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people, just like you, are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
Solved

what type wic card needed for cisco 2800 router

Posted on 2008-10-23
4
741 Views
Last Modified: 2008-11-06
Hi experts,
Could someone indicate what type card on a cisco 2800 series router I would nee if cirucit are deliveredas below
1) delivery of circuit using v.35
2) delivery of circuit using G.703
0
Comment
Question by:rcollie
  • 2
4 Comments
 
LVL 16

Expert Comment

by:btassure
ID: 22787869
It depends on what your ISP uses to terminate the premises equipment. Usually a WIC-1T (serial) will be what you are after but not all providers terminate on X21. If you can find out from the ISP what their termination is we can advise further...
0
 
LVL 5

Expert Comment

by:devangshroff
ID: 22787885
WIC 1T------one port serial interface card  require serial cable
WIC 2T------2 port serial interface card.    require smart serial cable
0
 

Author Comment

by:rcollie
ID: 22789379
the two option are how the circuit could be delivered.
if v.35 I would need wic 1T but if delivered as G.703 what card is use.
0
 
LVL 16

Accepted Solution

by:
btassure earned 500 total points
ID: 22789469
0

Featured Post

Free Tool: Path Explorer

An intuitive utility to help find the CSS path to UI elements on a webpage. These paths are used frequently in a variety of front-end development and QA automation tasks.

One of a set of tools we're offering as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

The Cisco RV042 router is a popular small network interfacing device that is often used as an internet gateway. Network administrators need to get at the management interface to make settings, change passwords, etc. This access is generally done usi…
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

809 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question