Solved

Cisco IP Phone "Power Save" features

Posted on 2008-10-23
3
992 Views
Last Modified: 2012-05-05
I have a Cisco CallManager Express system with about 75 phones, varing from 7940's to 7970's.
I've been requested to set the phones so the screen's backlight come on earlier than they are currently set.
It is a feature in the Power Save Configuration on the phones themselves. However, I can set them system wide from the CME.

I've done it once before, and set them to 7:30AM but now need to set them to come on earlier. The setting itself is "Display On Time". My problem is that I set it SO long ago, I don't remember where it is/how to set it. I've looked in my training manuals, and online, but cannot find it anywhere.
0
Comment
Question by:bradtberry
  • 2
3 Comments
 

Author Comment

by:bradtberry
ID: 22812770
I could really use some help if someone knows anything about this.

Thank you!
0
 
LVL 3

Accepted Solution

by:
dgboyd earned 250 total points
ID: 22815801
Hi, it's the 'service phone' parameter you change under telephony services.  Here is the link that shows you all the parameters to change the backlight settings.  Let me know if you have any problems with this link:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/command/reference/cme_s1ht.html#wp1083963
0
 

Author Comment

by:bradtberry
ID: 22816132
That is what I was looking for!

Thank you very much!
0

Featured Post

DevOps Toolchain Recommendations

Read this Gartner Research Note and discover how your IT organization can automate and optimize DevOps processes using a toolchain architecture.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

In the world of WAN, QoS is a pretty important topic for most, if not all, networks. Some WAN technologies have QoS mechanisms built in, but others, such as some L2 WAN's, don't have QoS control in the provider cloud.
I recently attended Cisco Live! in Las Vegas, a conference that boasted over 28,000 techies in attendance, and a week of hands-on learning hosted by a solid partner with which Concerto goes to market.  Every year, Cisco displays cutting-edge technol…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

770 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question