Solved

Why is my ping time too high?? Why it gives me slow connection to my server

Posted on 2008-10-23
4
1,520 Views
Last Modified: 2013-12-14
I had being told of having a very slow connection to a server ERP aplication we have at work, so i tried to ping the server and i gives me high times at ping.

What could be causing these problem, my ISP speed seems to be ok cause a navegate thru the web without problems or at least it seems no to slowdown.

Check the file and you will see there is high times a very low ping times or at least what i consider normal times.

Have some other network at another place an we have no problems connecting to the same server.

What could be the problem??

Hope anyone may help me solved this issue!!

pingtoday.txt
0
Comment
Question by:sisiliano
  • 3
4 Comments
 
LVL 3

Accepted Solution

by:
SamGarner earned 175 total points
Comment Utility
Could be a lot of things but the first thing i would check would be your ports configuration, firewall, etc make sure nothings getting blocked that shouldn't be.

Another possibility could be bad cable i have known cables that have been bent to much or run along side power cables slow down network speeds a lot. the best and easiest way to check this is with one of the more advanced Ethernet cable testers but these can be quite expensive i think it is possible to find pc software that can do a similar job.

hope this helps.
0
 
LVL 1

Author Comment

by:sisiliano
Comment Utility
Ok Sam
 Do you know of any software that may help to do such a job??
0
 
LVL 1

Author Comment

by:sisiliano
Comment Utility
Here is a tracert to the server

Traza a x.x.x.x sobre caminos de 30 saltos como m ximo.



  1    <1 ms    <1 ms    <1 ms  x.x.x.x

  2   385 ms   324 ms   368 ms  x.x.x.x

  3     *        *        *     Tiempo de espera agotado para esta solicitud.

  4     *      457 ms   381 ms  x.x.x.x

  5   599 ms   519 ms   553 ms  x.x.x.x

  6   593 ms     *      570 ms  x.x.x.x



Traza completa.

Hope this helps too!!
0
 
LVL 1

Author Closing Comment

by:sisiliano
Comment Utility
Even though the comment gave me clues of what it could be it did not solve my problem.
0

Featured Post

Why You Should Analyze Threat Actor TTPs

After years of analyzing threat actor behavior, it’s become clear that at any given time there are specific tactics, techniques, and procedures (TTPs) that are particularly prevalent. By analyzing and understanding these TTPs, you can dramatically enhance your security program.

Join & Write a Comment

Suggested Solutions

Setting up SSH Cisco We are all told that you should not use Telent for connecting to devices because it is unsecure and all clear text. Much better is to use SSH, but it can seem a bit of a challenge setting it all up and especially in a small n…
Cable Modem Provisioning from DPoE compliant server  This Article is to support CMTS administrators to provide an overview of DOCSIS compliance configuration file, and to provision a cable modem located at customer place from a Back office serve…
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

763 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

12 Experts available now in Live!

Get 1:1 Help Now