Solved

When configuring Easy VPN Server on Cisco 871, I'm receiving error during sending commands with wizard on command match protocol user-ctcp-ezvpnserver

Posted on 2008-10-24
2
779 Views
Last Modified: 2012-05-05
When configuring Easy VPN Server on Cisco 871, I'm receiving error during sending commands with wizard on command match protocol user-ctcp-ezvpnserver in block:

class-map type inspect match-any SDM_EASY_VPN_SERVER_TRAFFIC
 match protocol isakmp
 match protocol ipsec-msft
 match protocol user-ctcp-ezvpnserver
 match class-map SDM_AH
 match class-map SDM_ESP
 exit

Is any workaround with this problem or I should setup Easy VPN Server without wizard?
If yes, what are the steps to setup it without wizard? I need to setup one connection with Cisco VPN Client.
0
Comment
Question by:Mike7777777
2 Comments
 
LVL 79

Accepted Solution

by:
lrmoore earned 250 total points
Comment Utility
0

Featured Post

Why You Should Analyze Threat Actor TTPs

After years of analyzing threat actor behavior, it’s become clear that at any given time there are specific tactics, techniques, and procedures (TTPs) that are particularly prevalent. By analyzing and understanding these TTPs, you can dramatically enhance your security program.

Join & Write a Comment

Suggested Solutions

There are two basic ways to configure a static route for Cisco IOS devices. I've written this article to highlight a case study comparing the configuration of a static route using the next-hop IP and the configuration of a static route using an outg…
In the world of WAN, QoS is a pretty important topic for most, if not all, networks. Some WAN technologies have QoS mechanisms built in, but others, such as some L2 WAN's, don't have QoS control in the provider cloud.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

763 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

11 Experts available now in Live!

Get 1:1 Help Now