Solved

Quick PIX Question

Posted on 2008-10-24
2
254 Views
Last Modified: 2013-11-05
Removing the .1 subnet from my network and replacing it with a .12

My current PIX has this:

access-list 101 permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0

(because when you VPN in, we give you a .2 addy)

If I wanted to have it so when you came in, you could get to .12, would it be as simple as swapping out the 192.168.1.0 with 192.168.12.0?

Thanks.
0
Comment
Question by:dougp23
2 Comments
 
LVL 6

Accepted Solution

by:
aschaef217 earned 250 total points
ID: 22798643
Yes, that should work for you. Do you also have an access list to prevent NAT from being applied to the 192.168.2.0 IPs?  If so you also want to change the IP on that access-list as well to the 192.168.12.0 /24.
0
 
LVL 1

Author Comment

by:dougp23
ID: 22799335
I don't have the access list preventing NAT.  I am not sure why I wouldn't...perhaps sop if you VPN in, you can still surf the net on the PC you are vpn'ing in from.  Not sure!  I gotta learn way more about this networking stuff!!  Thanks!
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I recently had the displeasure of buying a new firewall at one of the buildings I play Sys Admin at. I had to get a better firewall than the cheap one that I had there since I was reconnecting the main office to the satellite office via point-to-poi…
Network traffic routing plays key role in your network, if you have single site with heavy browsing or multiple sites, replicating important application data from your Primary Default Gateway ,you have to route your other network traffic from your p…
This Micro Tutorial will teach you how to censor certain areas of your screen. The example in this video will show a little boy's face being blurred. This will be demonstrated using Adobe Premiere Pro CS6.
Two types of users will appreciate AOMEI Backupper Pro: 1 - Those with PCIe drives (and haven't found cloning software that works on them). 2 - Those who want a fast clone of their boot drive (no re-boots needed) and it can clone your drive wh…

777 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question