Solved

Cisco 2611 router connecting to verizon DSL

Posted on 2008-10-24
2
702 Views
Last Modified: 2012-06-22
Hello gents
I have Cisco 2611 router that I want to setup as a broadmand router at home.
1. I have a speedstream 4100 modem setup in bridge mode
2. Verizon DSL (no ppoe)
3. Cisco 2611 router with 2 ethernet ports
Could any of you cisco gurus give me a sample config for the router for this type of connection. Please help me out

Thanks and regards
0
Comment
Question by:elektrosoft
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 79

Accepted Solution

by:
lrmoore earned 500 total points
ID: 22803465

eth0/0
 ip address 12.34.56.7 255.255.255.248  <== whatever Verizon gave you
 ip nat outside
 no shut
eth 0/1
  ip address 192.168.199.1 255.255.255.0  <== whatever you want your inside LAN to be
  ip nat inside
 no shut

ip route 0.0.0.0 0.0.0.0 12.34.56.1  <== gateway IP provided by Verizon
access-list 1 permit 192.168.199.0 0.0.0.255
ip nat inside source list 1 interface eth0/0 overload
!

This simple config should get you online at least with basic nat


0

Featured Post

What, When and Where - Security Threats from Q1

Join Corey Nachreiner, CTO, and Marc Laliberte, Information Security Threat Analyst, on July 26th as they explore their key findings from the first quarter of 2017.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this tutorial I will show you with short command examples how to obtain a packet footprint of all traffic flowing thru your Juniper device running ScreenOS. I do not know the exact firmware requirement, but I think the fprofile command is availab…
Network traffic routing plays key role in your network, if you have single site with heavy browsing or multiple sites, replicating important application data from your Primary Default Gateway ,you have to route your other network traffic from your p…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…
If you’ve ever visited a web page and noticed a cool font that you really liked the look of, but couldn’t figure out which font it was so that you could use it for your own work, then this video is for you! In this Micro Tutorial, you'll learn yo…
Suggested Courses

623 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question