Solved

Cisco ACE Load Balancing Scripts

Posted on 2008-10-27
1
2,162 Views
Last Modified: 2008-11-23
Its a sprt of general question
I need to perfrom load balancing on a (currently small) server farm, the predictor for in service/out of service for one set of servers will need to login in to tomcat service and if log in is ok then the server is in - login fails = out of service
(for sum reason tom cat hangs quite regularly)

another set of servers will need to be balanced on a criteria of how busy the server actually is. I know on BigIp you can do least cons, etc but cant see how this is doen on a cisco ACE

any general tips on scripting most welcome
any help ....
0
Comment
Question by:artl2377
1 Comment
 
LVL 32

Accepted Solution

by:
harbor235 earned 500 total points
ID: 22821826

for configuring least connections predictor you must goto the server farm configuration

serverfarm X
predictor leastconns

For determining health and status you need to setup probes. There are many options here. Take a look at this doc, it is very good and easy to understand.

http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/v3.00_A1/configuration/slb/guide/rsfarms.html#wp1000327

harbor235 ;}

0

Featured Post

VMware Disaster Recovery and Data Protection

In this expert guide, you’ll learn about the components of a Modern Data Center. You will use cases for the value-added capabilities of Veeam®, including combining backup and replication for VMware disaster recovery and using replication for data center migration.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Network Switch Connections 8 53
EIGRP Load sharing 12 62
Adding switches as opposed to running cables 4 100
cradle point vpn to sonicwall 5 50
Hello All, I have been training on Multicast for a while now and whenever I start the topic , I find out that my friends /  Colleagues mention that they do not know how to test Multicast Joins. As most of the multicast would be video traffic and …
Before I go to far, let's explain HA (High Availability) and why you should consider it.  High availability is the mechanism used to provide redundancy to any service at the same site and appears as a single service to the users of that service.  As…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

863 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

24 Experts available now in Live!

Get 1:1 Help Now