Solved

How to setup ActiveSync through Exchange 2003 and ISA Server 2000.

Posted on 2008-10-28
4
596 Views
Last Modified: 2013-12-05
www.itc.virginia.edu/lsp/training/mom/paper/using_isa_server_with_exchange_2003.doc

Need a little help, I found this article describing how to allow ActiveSync through ISA Server 2000 and have setup the destination set and web publishing rule as described.  My first question, do I need to setup SSL on the web publishing rule that is explained at the top of page 40?  I do want to do this eventually, but for now I'm more interested in getting it to work b/c some pressure is being applied to do so.

As far as setting up Exchange 2003, I went to System Manager<Global Settings, and then the properties of Mobile Devices and enabled all options.  Is there anything else on Exchange that needs setup?  I would also like to add that I don't have a front end exchange server, and have come across some articles that it's difficult to setup Activesync w/o a front end.  Are there any special instructions on making it work this way?  I do have a Sonicwall Email Security Device that I could setup to essentially be a front end mail server.
0
Comment
Question by:Go-GBS
  • 4
4 Comments
 

Author Comment

by:Go-GBS
ID: 22820430
http://searchexchange.techtarget.com/tip/0,289483,sid43_gci1311902,00.html

I found this article referring to the problems you may have w/o a front-end Exchange server.  Is this accurate, or are there other/better workarounds?
0
 

Author Comment

by:Go-GBS
ID: 22821753
When I try to sync the phone, I get,

ActiveSync encoutered a problem on the server.

With support code 0x85010014
0
 

Accepted Solution

by:
Go-GBS earned 0 total points
ID: 22842366
Here's the loggin I'm getting from the IIS when trying to sync from the phone.

2008-10-30 00:25:26 10.1.1.2 PROPFIND /exchange/username@domainname.com/NON_IPM_SUBTREE/Microsoft-Server-ActiveSync/PocketPC/3K0Z12F34839B31DBA0004E2F84EMN12 - 80 - 10.1.1.2 Microsoft-Server-ActiveSync/6.5.7638.1 401 2 5
0
 

Author Comment

by:Go-GBS
ID: 22932505
Not a solution, but due to a lack of feedback I closed the question.
0

Featured Post

Why You Should Analyze Threat Actor TTPs

After years of analyzing threat actor behavior, it’s become clear that at any given time there are specific tactics, techniques, and procedures (TTPs) that are particularly prevalent. By analyzing and understanding these TTPs, you can dramatically enhance your security program.

Join & Write a Comment

Local Continuous Replication is a cost effective and quick way of backing up Exchange server data. The following article describes the steps required to configure Local Continuous Replication. Also, the article tells you how to restore from a backup…
In this article, I will show you HOW TO: Install VMware Tools for Windows on a VMware Windows virtual machine on a VMware vSphere Hypervisor 6.5 (ESXi 6.5) Host Server, using the VMware Host Client. The virtual machine has Windows Server 2016 instal…
To show how to create a transport rule in Exchange 2013. We show this process by using the Exchange Admin Center. Log into Exchange Admin Center.: First we need to log into the Exchange Admin Center. Navigate to the Mail Flow >> Rules tab.:  To cr…
The Task Scheduler is a powerful tool that is built into Windows. It allows you to schedule tasks (actions) on a recurring basis, such as hourly, daily, weekly, monthly, at log on, at startup, on idle, etc. This video Micro Tutorial is a brief intro…

744 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

11 Experts available now in Live!

Get 1:1 Help Now