Solved

OCS 2007 Deployment - [0x80070005] Access is denied

Posted on 2008-10-28
5
3,613 Views
Last Modified: 2013-12-12
Hi,

We are currently trying to deploy OCS 2007 and are getting the following error during deployment step 2:

"Failure
[0x80070005] Access is denied. "

***See attached screenshot for detail***

- The AD prep procedure went off without a hitch, and I have ensured that the account I'm using to install has correct permissions (Domain Admins & RTCUniversalServerAdmins).

Given the time I have wasted searching for answers to no avail, I am assigning 500 points to this question.

Any help would be greatly appreciated.

Thanks.
EE.jpg
0
Comment
Question by:John_R_PETS
5 Comments
 
LVL 7

Expert Comment

by:wct296
ID: 22828875
Nearly all the problems similar to that I had seem to stem from certificate issues with OCS.. make sure you have a Unified communications certificate that is given by a good certificate provider like commodo or verisign and that the certificate is properly registered with the FQDN of your system..

0
 
LVL 12

Expert Comment

by:gaanthony
ID: 22857383
If you are deploying to a child domain be sure you are logged on as a Domain admin for that domain, not the root.  Also ensure you are not installing OCS on a box colocated with Exchange.  The server also cannot have the certificate role colocated.  Check that the SPN is correct.
If this is a new install and you do not have LC 2005 installed and you had built a test OCS server but did not deactivate before uninstalling to build your production environment you can run the command line and run the LCSCMD for domainunprep and forestunprep to clear out any orphan entries and then run the OCS Wizard and do the AD preps again in the wizard and process with the server install.

0
 

Accepted Solution

by:
John_R_PETS earned 0 total points
ID: 22944772
Thanks for the advice. In the end I created a new account on the domain with the same permissions, and attempted the install under that account. For some reason, the deployment continued past this step. Why it would not work for the initial account I was using remaains a mystery...
0
 

Expert Comment

by:skynetop
ID: 32346039
I am getting this error with the deployment check, it is already installed.

Can you have an issue with the server if the Pool name matches the server name?  I have a cert from Digicert
0
 

Expert Comment

by:Hyperlite84
ID: 32648012
Skynetop I too have a UC cert from Digicert and am getting the same error in deployment check.  Maybe we can put our heads together to figure this out
0

Featured Post

Complete VMware vSphere® ESX(i) & Hyper-V Backup

Capture your entire system, including the host, with patented disk imaging integrated with VMware VADP / Microsoft VSS and RCT. RTOs is as low as 15 seconds with Acronis Active Restore™. You can enjoy unlimited P2V/V2V migrations from any source (even from a different hypervisor)

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Today companies are subjected to more-and-more data, and it won't stop any time soon.  But there are obvious opportunities for reducing data, particularly data duplicated among companies.
Developer portfolios can be a bit of an enigma—how do you present yourself to employers without burying them in lines of code?  A modern portfolio is more than just work samples, it’s also a statement of how you work.
The viewer will learn how to set up a document for the web and print and the recommended PPI for printing.
This is used to tweak the memory usage for your computer, it is used for servers more so than workstations but just be careful editing registry settings as it may cause irreversible results. I hold no responsibility for anything you do to the regist…

770 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question