Solved

IP-enabled device need connection through VPN

Posted on 2008-10-29
5
298 Views
Last Modified: 2012-06-21
We have an IP-enabled device that we wish to communicate with over the Internet. This device is placed at a remote location (supplier) and our systems need to communicate with this device. We have a Cisco 1812 connecting our local system with the Internet.

Q1. What is the best solution for connecting the IP-enabled device with our system over the Internet?

I suppose a gateway to gateway vpn would be a good solution, but unfortunately we do not have access to configure the 1812. It is configured for vpn client access.

Q2. Is it possible to configure, for example, a Cisco ASA 5505 to connect to the 1812 as a vpn client?

Q3. Is it possible to use a PC (connected via VPN to our system) as a proxy between the IP-enabled device and our system?
0
Comment
Question by:nebb-alx
  • 3
  • 2
5 Comments
 
LVL 32

Expert Comment

by:harbor235
ID: 22831423


Can't the IP-enabled device connect to the 1812 as a VPN clinet? Assuming it can run a VPN client?

harbor235 ;}
0
 

Author Comment

by:nebb-alx
ID: 22831785
If life was that good :) Nope, it is not possible to install any software on that device - it is entirely proprietary. So it needs another device to provide the vpn.
0
 
LVL 32

Accepted Solution

by:
harbor235 earned 500 total points
ID: 22832538


Yoou can run easyvpn on another 1812 acting as a client to connect to the existing 1812 vpn server.
Any IOS device can run easyvpn.

http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/ezvpn505.html

harbor235 ;}
0
 

Author Closing Comment

by:nebb-alx
ID: 31511155
Thank you! I have a separate thread where I try to configure this EasyVPN. If you are able to have a look at it I will be very pleased :-) Need to have it working in a few hours (collegue flying half across the country with one unit on Monday.) Cheers!
0
 

Author Comment

by:nebb-alx
ID: 23054610
0

Featured Post

Free learning courses: Active Directory Deep Dive

Get a firm grasp on your IT environment when you learn Active Directory best practices with Veeam! Watch all, or choose any amount, of this three-part webinar series to improve your skills. From the basics to virtualization and backup, we got you covered.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Server 2012 L2TP VPN Windows client to server 3 29
Install SSL certificate on Cisco ASA 5506 6 49
VPN Server 5 15
Single Number Reach 3 13
Secure VPN Connection terminated locally by the Client.  Reason 442: Failed to enable Virtual Adapter. If you receive this error on Windows 8 or Windows 8.1 while trying to connect with the Cisco VPN Client then the solution is a simple registry f…
For months I had no idea how to 'discover' the IP address of the other end of a link (without asking someone who knows), and it drove me batty. Think about it. You can't use Cisco Discovery Protocol (CDP) because it's not implemented on the ASAs.…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

828 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question