Solved

How do I configure multi sites to sites VPN?

Posted on 2008-10-29
2
361 Views
Last Modified: 2011-10-19
I have one sonicwall 2040 pro with SonicOS Enhanced and 7 sonicwall 170 sp. I want to set up Multisite VPN from 170 sp to 2040. There is no server invole just site to site VPN. Is this possible can be done with out any extra VPN  software or hardware.The perfect condition is all site can comunicate with each other is possible but the most import thing I try to accomplish is all internal network from 2040 pro can communicate with any network behind 170 sp
Lan IP for 2040 pro is 192.168.0.0
Lan IP for 170 sp is 192.168.y.0 where y is stand for site 1,2 3 4 5 6 and 7

Thank you for all help.

Loc
0
Comment
Question by:locnd01
2 Comments
 
LVL 4

Accepted Solution

by:
remarks999 earned 500 total points
ID: 22841391
The easiest way would be to setup a VPN policy to each remote site from the main site of the 2040. That would allow all remote sites to communicate with the main site. Now for the remote sites to talk to each other, you would have to setup what's call a hub and spoke VPN. I've attached files on how to do this.
Implementing-Hub-and-Spoke-VPN-o.pdf
Implementing-Hub-and-Spoke-VPN-o.pdf
0
 

Author Closing Comment

by:locnd01
ID: 31511193
Thank you very much. That exactly how I want it setup.

0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
HTTPS/SSL based VPN will full functionality? 2 58
IT Contract Fee 17 147
Remote site access to DMZ via Site-to-Site (L2L) VPN - Cisco ASA 3 56
New office setup 2 22
Sometimes, you want your microsoft VPN to route all the traffic to the remote network. Usually your employer network. This makes it possible to access all the nodes inside this remote LAN, even if they have no "public DNS" entries. To do so, you wo…
I've had to do a bit of research to setup my VPN connection so that Clients can access Windows Server 2008 network shares.  I have a Cisco ASA 5510 firewall.  I found an article which was extremely useful: It had a solution if you use ASDM to config…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

775 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question