Solved

How to tftp to and from Cisco ASA?

Posted on 2008-10-29
2
4,608 Views
Last Modified: 2012-08-13
I've done this before on cisco routers, but it's been awhile and I need a refresher. I have a tftp server set up (I think). Let's say I have a Cisco ASA in place and I want to use this tftp server to take it's config and copy it over to a second cisco ASA?
0
Comment
Question by:numb3rs1x
2 Comments
 

Accepted Solution

by:
Honig earned 250 total points
ID: 22837446
copy <from> <to> is the command

"copy running-config tftp" would copy the running-config to a tftp server of some kind. You follow the prompts to enter the ip address of the server and the file name you want to give the file. Make sure your tftp server is setup to receive.

"copy tftp startup-config" would copy a config down from a tftp server to the starup-config. Again follow the prompts to enter the ip address and the file name to get from the tftp server.

More info here: http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008072142a.shtml

0
 

Author Closing Comment

by:numb3rs1x
ID: 31511506
that's what I needed. Thanks!
0

Featured Post

Maximize Your Threat Intelligence Reporting

Reporting is one of the most important and least talked about aspects of a world-class threat intelligence program. Here’s how to do it right.

Join & Write a Comment

We've been using the Cisco/Linksys RV042 for years as: - an internet Gateway - a site-to-site VPN device - a leased line site-to-site subnet-to-subnet interface (And, here I'm assuming that any RV0xx behaves the same way as an RV042.  So that's …
Problem Description:   Couple of months ago we upgraded the ADSL line at our branch office from Home to Business line. The purpose of transforming the service to have static public IP’s. We were in need for public IP’s to publish our web resour…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

746 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

9 Experts available now in Live!

Get 1:1 Help Now