Solved

WLAN not working after Windows XP SP3

Posted on 2008-10-30
8
6,503 Views
Last Modified: 2012-06-21
After an atomatic installation of Windows XP SP3, the follwing error appeared on rebooting:
"AirGCFG.exe - Entry Point Not Found. The procedure enry point apsGetInterfaceCount could not be located in the
dynamic link library wlanapi.dll."
I searched for the problem and the recommended solution was to upgrade to a newer version of the WLAN driver (ftp://ftp.dlink.com/Wireless/dwlg122_revC/Drivers/DWL-G122_C1_driver_3.10.zip).
I did that and the DLL error disappeared.
Now I'm no longer able to use an encrypted WLAN connection. Before the update I used WPA2 PSK.  With encryption turned on, the WLAN adapter now seems to connect but is unable to aquire an IP address from the router. Unsecured WLAN works without problems and connects within seconds.
I tried to configure the WLAN connection with the XP tool and the DLink tool, same result. Any ideas?
0
Comment
Question by:Michael Pfister
  • 4
  • 3
8 Comments
 
LVL 1

Assisted Solution

by:geekhelp4u
geekhelp4u earned 400 total points
ID: 22840567
0
 
LVL 28

Author Comment

by:Michael Pfister
ID: 22840643
This fix is included in SP3. http://support.microsoft.com/kb/946480
0
 
LVL 1

Expert Comment

by:geekhelp4u
ID: 22840780
What version of the DWL-G122 do you have?

On the label it should say H/W Ver:
0
Back Up Your Microsoft Windows Server®

Back up all your Microsoft Windows Server – on-premises, in remote locations, in private and hybrid clouds. Your entire Windows Server will be backed up in one easy step with patented, block-level disk imaging. We achieve RTOs (recovery time objectives) as low as 15 seconds.

 
LVL 28

Author Comment

by:Michael Pfister
ID: 22840953
Not on site now, I believe C1
0
 
LVL 1

Expert Comment

by:geekhelp4u
ID: 22841004
might double check... on Dlinks main page they just have an A1, A2, B1 and D1

It also looks like 2.1 was the latest driver built for XP with 3.1 being a Vista driver
0
 
LVL 28

Author Comment

by:Michael Pfister
ID: 22841154
The readme states different:

DWL-G122 V.C1 Driver/Utility Release Note  
File Name: D-Link DWL-G122.B1v2.04 G122.C1v3.10 Build 61612 S0032 (ML15).zip
Hardware: DWL-G122(rev.C) (Ralink RT2571W+RT2528)
Utility version : V3.10 (15 languages for EU)
Driver Version: V1.0.1.0 (Win 2K/XP/98/SE, XP-64-bit)
Vista Driver: use XP driver 1.0.1.0
Utility : 3.10 Build 61614 S0032
Date: 2007/4/14

Hardware: DWL-G122(rev.B) (Ralink RT2571+RT2526)
Utility version : V2.04
Driver Version: V2.0.1.0 (Win 2K/XP)
Driver Version: V2.1.0.0 (Win 98/ME)
Driver Version: V2.0.3.0 (XP-64-bit)

0
 
LVL 2

Assisted Solution

by:dannyyo
dannyyo earned 100 total points
ID: 22843861
It seems that XP sp3 breaks certain things that were working previous to install.  I've seen it where it messed up the ability to rotate the monitor.
0
 
LVL 28

Accepted Solution

by:
Michael Pfister earned 0 total points
ID: 22865792
I tried to upgrade the router (Draytek Vigor 2200VG) to a newer firmware, but the router resets everytime an upload is started...

Therefore I replaced it with my test router and now I'm able to use WPA... very strange. So the computer seems to be ok, the WLAN stick is ok. Its a problem with SP3 and the router...
0

Featured Post

Free Tool: SSL Checker

Scans your site and returns information about your SSL implementation and certificate. Helpful for debugging and validating your SSL configuration.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
using BGP Attributes 2 108
Linksys 4 port wireless router 62 60
Amazon Echo Dot 2 setup problem 5 39
Run Access2013-32bit under WinXP? 4 28
If you have done a reformat of your hard drive and proceeded to do a successful Windows XP installation, you may notice that a choice between two operating systems when you start up the machine. Here is how to get rid of this: Click Start Clic…
For both online and offline retail, the cross-channel business is the most recent pattern in the B2C trade space.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
Two types of users will appreciate AOMEI Backupper Pro: 1 - Those with PCIe drives (and haven't found cloning software that works on them). 2 - Those who want a fast clone of their boot drive (no re-boots needed) and it can clone your drive wh…

840 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question