Solved

How-to Allow domains through Anti-Spam in Exchange 2007?

Posted on 2008-10-30
8
3,589 Views
Last Modified: 2012-05-07
I have some list servs that need to come through our Exchange 2007 server, but I'm not 100% sure how to do it.

On the Anti-Spam tab in EMC, the only thing you can add is the IP address, but I need to make sure the domain is allowed to come through because of things like lists changing thier IPs or maybe they use multiple IPs to send from.

I found this page: http://technet.microsoft.com/en-us/library/aa995952(EXCHG.80).aspx and used "Set-ContentFilterConfig -BypassedSenderDomains *.example.com"  in EMS, but I'm not sure if this is correct.  I also find it hard to believe this can't be accomplished from the EMC.

This is the only Exchange box we have, the Hub Transport and all that other good stuff runs on here.  I am also not on SP1 yet as I haven't had time to install and be around to recover if it breaks.

Any help will be much appreciated.
Thanks!
0
Comment
Question by:andyoww
  • 5
  • 3
8 Comments
 
LVL 32

Expert Comment

by:gupnit
ID: 22845316
Hi,
The link that you have got is perfect.
See as far as tasks not possible in EMC and only in EMS....well you are right. See anything that is done on EMC actually run the same cmdlets in the background (ie EMS cmdlets).
MS has not added all functionality into EMC yet, so most of the tasks in Exchange 2007 are done via EMS (ie Powershell)
Hope this helps
Thanks
Nitin
0
 
LVL 4

Author Comment

by:andyoww
ID: 22845401
OK Just so I understand...
The cmdlet I ran: "Set-ContentFilterConfig -BypassedSenderDomains *.example.com" ,with the domains I need replacing the example.com, will work fine?  I actually had a few domains and according to the document above, I seperated them with commas. ex: "...domain1.com, domain2.com, domain3.com".

The only thing I didn't do was put the * in front of the domains, seems I missed that part.  Will that have a big effect?  If so, how do I go back and fix that?

Thanks.
0
 
LVL 32

Accepted Solution

by:
gupnit earned 250 total points
ID: 22845462
Hi,
The option is
set-contentfilterconfig -bypassedsenderdomain $Null
Also look at this LInk for good reading: http://www.petri.co.il/using-exchange-2007-management-shell-configure-content-filtering-part2.htm
Thanks
Nitin
0
Optimizing Cloud Backup for Low Bandwidth

With cloud storage prices going down a growing number of SMBs start to use it for backup storage. Unfortunately, business data volume rarely fits the average Internet speed. This article provides an overview of main Internet speed challenges and reveals backup best practices.

 
LVL 4

Author Comment

by:andyoww
ID: 22845541
OK Cool.
I check the status using: "$list = (Get-ContentFilterConfig).BypassedSenderDomains" and the domains showed up, but the Subdomains showed up as false.

Then I ran your command with the $Null and they were cleared out.

Then re-ran the "Set-ContentFilterConfig -BypassedSenderDomains *.example.com, *example2.com, *.example3.com" and made sure I included the * and this time when I ran the $list, it showed the subdomains as true.

Thanks!
0
 
LVL 4

Author Closing Comment

by:andyoww
ID: 31618373
Thanks again!
0
 
LVL 32

Expert Comment

by:gupnit
ID: 22845556
My Pleasure, Glad to help
Do not forget to close the question ;-)
Thanks
Nitin
0
 
LVL 4

Author Comment

by:andyoww
ID: 22878101
This doesn't look like it's working.  Is there a service I have to restart?
0
 
LVL 4

Author Comment

by:andyoww
ID: 22878167
I think I spoke too soon.  I signed up again for the lists I was supposed to be a member of, and the confirmation emails came through.
Looks OK so far.
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Lotus Notes – formerly IBM Notes – is an email client application, while IBM Domino (earlier Lotus Domino) is an email server. The client possesses a set of features that are even more advanced as compared to that of Outlook. Likewise, IBM Domino is…
How to resolve IMCEAEX NDRs in Exchange or Exchange Online related to invalid X500 addresses.
In this video we show how to create an Accepted Domain in Exchange 2013. We show this process by using the Exchange Admin Center. Log into Exchange Admin Center.: First we need to log into the Exchange Admin Center. Navigate to the Mail Flow >> Ac…
The video tutorial explains the basics of the Exchange server Database Availability groups. The components of this video include: 1. Automatic Failover 2. Failover Clustering 3. Active Manager

861 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question