Solved

Route Public IP to DMZ

Posted on 2008-10-30
1
1,118 Views
Last Modified: 2012-05-05
Current config
Outside x.x.x.2/27
Inside x.x.x.1/16 Private Address
DMZ x.x.x.1/16 Private Address
We are using static NAT to publish all of our servers in the DMZ this works very well no issues. We are installing a OCS 2007 Edge server and one of the requirements is to have a public routable IP on the interface that does voice and video. Entry my problem, how do I get one of my public IPs routed through our ASA 5510 to the server.

I thought about adding a sub interface on another VLAN for this and assigning one of my public IPs to the sub interface and then another to the server nic. My question is will this cause routing issues? because basicly I would have the same network assigned to 2 interfaces but my default route statments are assined by interface. Very confusing, would like some guidance on this before I jump in and make a mess of things.
0
Comment
Question by:DAKARG
1 Comment
 
LVL 32

Accepted Solution

by:
harbor235 earned 500 total points
ID: 22842750


You have plent of interfaces you could also use a dedicated interface or the sub interface, either wayt it works.
The only problem is you need a unique network IP block for the sub or the physical interface, it cannot not be an IP in the same network as the outside interface.

You cannot have the same network assigned to 2 different interfaces

harbor235 ;}
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
EIGRP Configuration 2 46
Clearing router cache 12 41
How to list which IP address is the managed switch in my company ? 13 90
nexus filter logs 3 25
How to configure Site to Site VPN on a Cisco ASA.     (version: 1.1 - updated August 6, 2009) Index          [Preface]   1.    [Introduction]   2.    [The situation]   3.    [Getting started]   4.    [Interesting traffic]   5.    [NAT0]   6.…
There are many useful and sometimes not well documented or forgotten IOS or ASA/PIX commands. See IPE article here , there was also one on PacketU and on Cisco Tips & Tricks. Below are my favorites. I give also a few most often used for Cisco IPS an…
Both in life and business – not all partnerships are created equal. As the demand for cloud services increases, so do the number of self-proclaimed cloud partners. Asking the right questions up front in the partnership, will enable both parties …
Both in life and business – not all partnerships are created equal. Spend 30 short minutes with us to learn:   • Key questions to ask when considering a partnership to accelerate your business into the cloud • Pitfalls and mistakes other partners…

911 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

21 Experts available now in Live!

Get 1:1 Help Now