Solved

Not able to install IIS on Windows Vista - errors

Posted on 2008-10-30
19
1,673 Views
Last Modified: 2012-08-14
Under adding the IIS software through the control panel, I get:
An error has accurred. Not all of the features were successfully changed.  

 Then when is restarting I also get this error: Updates were not configured correctly.  Reverting Changes.

I cant upload the CBS.log file as it is to large.  What other information is needed to help get IIS installed?
0
Comment
Question by:mustang_keith
  • 9
  • 8
19 Comments
 
LVL 10

Expert Comment

by:tboy6423
ID: 22841873
What version of vista do you have?
0
 

Author Comment

by:mustang_keith
ID: 22841952
Vista Ultimate 32bit  SP1
0
 
LVL 10

Expert Comment

by:tboy6423
ID: 22842013
Please take a look at this article and try what is suggested then try installing IIS again:
http://aaronwl.com/research/cs/os/windows/bugs/vista_features_fail.htm 
0
VMware Disaster Recovery and Data Protection

In this expert guide, you’ll learn about the components of a Modern Data Center. You will use cases for the value-added capabilities of Veeam®, including combining backup and replication for VMware disaster recovery and using replication for data center migration.

 
LVL 10

Expert Comment

by:tboy6423
ID: 22842052
Also please look at the IIS7.LOG to see what is after the < !!FAIL!! > lines. This should tell you what failed
0
 
LVL 10

Expert Comment

by:tboy6423
ID: 22842065
I also came across this post, from someone with the same issue, if the above suggestion did not fix your issue please try this:
http://forums.iis.net/t/1152513.aspx
0
 

Author Comment

by:mustang_keith
ID: 22842094
English is the only Language that is installed according to the Install/Uninstall Languages.
0
 

Author Comment

by:mustang_keith
ID: 22843337
I tried the above command line prompts and that didnt work either, below is one area of the CBS log:

Installer name: [12]"Directory SD"
2008-10-30 13:26:31, Info                  CSI    000003a9 Performing 1 operations; 1 are not lock/unlock and follow:
  LockComponentPath (10): flags: 0 comp: {l:16 b:f1f573a6b43ac901e2010000a813a817} pathid: {l:16 b:f1f573a6b43ac901e3010000a813a817} path: [l:234{117}]"\SystemRoot\WinSxS\x86_microsoft-windows-cmitrustinfoinstallers_1122334455667788_6.0.6001.18000_none_9204f851b707724d" pid: 13a8 starttime: 128698609154121537 (0x01c93ab401b7df41)
2008-10-30 13:26:31, Info                  CSI    000003aa Performing 1 operations; 1 are not lock/unlock and follow:
  LockComponentPath (10): flags: 0 comp: {l:16 b:011d74a6b43ac901e4010000a813a817} pathid: {l:16 b:011d74a6b43ac901e5010000a813a817} path: [l:234{117}]"\SystemRoot\WinSxS\x86_microsoft-windows-cmitrustinfoinstallers_1122334455667788_6.0.6001.18000_none_9204f851b707724d" pid: 13a8 starttime: 128698609154121537 (0x01c93ab401b7df41)
2008-10-30 13:26:31, Info                  CSI    000003ab@2008/10/30:17:26:31.792 CSI Advanced installer perf trace:
CSIPERF:AIDONE;{4f9da785-7ffc-4a7d-9e7e-b1a67ad8b508};(null);6987
2008-10-30 13:26:31, Info                  CSI    000003ac End executing advanced installer (sequence 333)
    Completion status: S_OK

2008-10-30 13:26:36, Info                  CSI    000003ad Creating NT transaction (seq 5), objectname [6]"(null)"
2008-10-30 13:26:36, Info                  CSI    000003ae Created NT transaction (seq 5) result 0x00000000, handle @0xb3ac
2008-10-30 13:26:37, Info                  CSI    000003af@2008/10/30:17:26:37.979 CSI perf trace:
CSIPERF:TXCOMMIT;1187222
2008-10-30 13:26:37, Info                  CBS    Failed removing impactful-commit disabling value from CCP. hr: 0x80070002
2008-10-30 13:26:37, Error                 CBS    Exec: An error occurred while committing the transaction, the transaction has been rolled back.
2008-10-30 13:26:37, Info                  CSI    000003b0@2008/10/30:17:26:37.988 CSI Transaction @0x72c1b08 destroyed
2008-10-30 13:26:38, Info                  CBS    WER: Generating failure report for package: Microsoft-Windows-Foundation-Package~31bf3856ad364e35~x86~~6.0.6000.16386, status: 0x80070643, failure source: Execute, start state: 7, target state: 7
2008-10-30 13:26:40, Info                  CBS    Exec: Processing complete.  Session: 29964980:30997457, Package: Microsoft-Windows-Foundation-Package~31bf3856ad364e35~x86~~6.0.6000.16386, hr: 0x80070643
2008-10-30 13:26:40, Info                  CBS    Exec: End: nested restore point - complete.
2008-10-30 13:26:40, Info                  CBS    Restored system sleep block state: 0x80000000
2008-10-30 13:26:40, Info                  CBS    Session: 29964980:30997457 finalized.  Reboot required: no
0
 

Author Comment

by:mustang_keith
ID: 22843590
more info from CBS log that might help???

   CSI    000003a6@2008/10/30:17:26:31.785 CSI Advanced installer perf trace:
CSIPERF:AIDONE;{51d504ad-4868-464c-a504-e6cc8a210a97};(null);9028
2008-10-30 13:26:31, Info                  CSI    000003a7 End executing advanced installer (sequence 332)
    Completion status: S_OK

2008-10-30 13:26:31, Info                  CSI    000003a8 Begin executing advanced installer phase 30 (0x0000001e) index 119 (0x00000077) (sequence 333)
    Old component: Microsoft-Windows-IIS-CoreWebEngine, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
    New component: (null)
    Install mode: uninstall
    Installer ID: {4f9da785-7ffc-4a7d-9e7e-b1a67ad8b508}
    Installer name: [12]"Directory SD"
2008-10-30 13:26:31, Info                  CSI    000003a9 Performing 1 operations; 1 are not lock/unlock and follow:
  LockComponentPath (10): flags: 0 comp: {l:16 b:f1f573a6b43ac901e2010000a813a817} pathid: {l:16 b:f1f573a6b43ac901e3010000a813a817} path: [l:234{117}]"\SystemRoot\WinSxS\x86_microsoft-windows-cmitrustinfoinstallers_1122334455667788_6.0.6001.18000_none_9204f851b707724d" pid: 13a8 starttime: 128698609154121537 (0x01c93ab401b7df41)
2008-10-30 13:26:31, Info                  CSI    000003aa Performing 1 operations; 1 are not lock/unlock and follow:
  LockComponentPath (10): flags: 0 comp: {l:16 b:011d74a6b43ac901e4010000a813a817} pathid: {l:16 b:011d74a6b43ac901e5010000a813a817} path: [l:234{117}]"\SystemRoot\WinSxS\x86_microsoft-windows-cmitrustinfoinstallers_1122334455667788_6.0.6001.18000_none_9204f851b707724d" pid: 13a8 starttime: 128698609154121537 (0x01c93ab401b7df41)
2008-10-30 13:26:31, Info                  CSI    000003ab@2008/10/30:17:26:31.792 CSI Advanced installer perf trace:
CSIPERF:AIDONE;{4f9da785-7ffc-4a7d-9e7e-b1a67ad8b508};(null);6987
2008-10-30 13:26:31, Info                  CSI    000003ac End executing advanced installer (sequence 333)
    Completion status: S_OK

2008-10-30 13:26:36, Info                  CSI    000003ad Creating NT transaction (seq 5), objectname [6]"(null)"
2008-10-30 13:26:36, Info                  CSI    000003ae Created NT transaction (seq 5) result 0x00000000, handle @0xb3ac
2008-10-30 13:26:37, Info                  CSI    000003af@2008/10/30:17:26:37.979 CSI perf trace:
CSIPERF:TXCOMMIT;1187222
2008-10-30 13:26:37, Info                  CBS    Failed removing impactful-commit disabling value from CCP. hr: 0x80070002
2008-10-30 13:26:37, Error                 CBS    Exec: An error occurred while committing the transaction, the transaction has been rolled back.
2008-10-30 13:26:37, Info                  CSI    000003b0@2008/10/30:17:26:37.988 CSI Transaction @0x72c1b08 destroyed
2008-10-30 13:26:38, Info                  CBS    WER: Generating failure report for package: Microsoft-Windows-Foundation-Package~31bf3856ad364e35~x86~~6.0.6000.16386, status: 0x80070643, failure source: Execute, start state: 7, target state: 7
2008-10-30 13:26:40, Info                  CBS    Exec: Processing complete.  Session: 29964980:30997457, Package: Microsoft-Windows-Foundation-Package~31bf3856ad364e35~x86~~6.0.6000.16386, hr: 0x80070643
2008-10-30 13:26:40, Info                  CBS    Exec: End: nested restore point - complete.
2008-10-30 13:26:40, Info                  CBS    Restored system sleep block state: 0x80000000
2008-10-30 13:26:40, Info                  CBS    Session: 29964980:30997457 finalized.  Reboot required: no
0
 
LVL 10

Expert Comment

by:tboy6423
ID: 22843680
do you have a IIS7.LOG  ? That would be more helpful. Also are there any errors in reference to the install in the event viewer?
0
 

Author Comment

by:mustang_keith
ID: 22843694
More errors from event viewer:
Windows Servicing failed to complete the process of setting package Windows Foundation
(Foundation) into Installed(Installed) state
Windows Servicing failed to complete the process of setting package Client-Features (Feature Pack) into Installed(Installed) state

ACTUALL THERE ARE a LOT of SIMILAR ERRORS:


Windows Servicing failed to complete the process of changing update 937286-135_en-us_PACKAGE from package KB937286(Update) into Absent(Absent) state
0
 
LVL 10

Expert Comment

by:tboy6423
ID: 22843737
Please take a look at this KB, it's very similar to the issue you are having:
http://support.microsoft.com/kb/931712 
0
 

Author Comment

by:mustang_keith
ID: 22844226
Part of CBS log after sfc scan:

2008-10-30 14:37:55, Info                  CSI    0000019a [SR] Verify complete
2008-10-30 14:37:55, Info                  CSI    0000019b [SR] Repairing 1 components
2008-10-30 14:37:55, Info                  CSI    0000019c [SR] Beginning Verify and Repair transaction
2008-10-30 14:37:55, Info                  CSI    0000019d Hashes for file member \SystemRoot\WinSxS\x86_microsoft-windows-wmi-core_31bf3856ad364e35_6.0.6001.18000_none_b95403151f989ff3\framedyn.dll do not match actual file [l:24{12}]"framedyn.dll" :
  Found: {l:32 b:AhdBGWJAzk6pS+GZxJS2RzYvoZ4fGsQiB4Hrrak5PdM=} Expected: {l:32 b:P51Syu2WiYfj5uYMQzoGOoB+xmZ0/RWTmv/8SjI4yjE=}
2008-10-30 14:37:55, Info                  CSI    0000019e [SR] Cannot repair member file [l:24{12}]"framedyn.dll" of Microsoft-Windows-WMI-Core, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2008-10-30 14:37:55, Info                  CSI    0000019f Hashes for file member \SystemRoot\WinSxS\x86_microsoft-windows-wmi-core_31bf3856ad364e35_6.0.6001.18000_none_b95403151f989ff3\framedyn.dll do not match actual file [l:24{12}]"framedyn.dll" :
  Found: {l:32 b:AhdBGWJAzk6pS+GZxJS2RzYvoZ4fGsQiB4Hrrak5PdM=} Expected: {l:32 b:P51Syu2WiYfj5uYMQzoGOoB+xmZ0/RWTmv/8SjI4yjE=}
2008-10-30 14:37:55, Info                  CSI    000001a0 [SR] Cannot repair member file [l:24{12}]"framedyn.dll" of Microsoft-Windows-WMI-Core, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2008-10-30 14:37:55, Info                  CSI    000001a1 Hashes for file member \??\C:\Windows\System32\framedyn.dll do not match actual file [l:24{12}]"framedyn.dll" :
  Found: {l:32 b:AhdBGWJAzk6pS+GZxJS2RzYvoZ4fGsQiB4Hrrak5PdM=} Expected: {l:32 b:P51Syu2WiYfj5uYMQzoGOoB+xmZ0/RWTmv/8SjI4yjE=}
2008-10-30 14:37:55, Info                  CSI    000001a2 Hashes for file member \SystemRoot\WinSxS\x86_microsoft-windows-wmi-core_31bf3856ad364e35_6.0.6001.18000_none_b95403151f989ff3\framedyn.dll do not match actual file [l:24{12}]"framedyn.dll" :
  Found: {l:32 b:AhdBGWJAzk6pS+GZxJS2RzYvoZ4fGsQiB4Hrrak5PdM=} Expected: {l:32 b:P51Syu2WiYfj5uYMQzoGOoB+xmZ0/RWTmv/8SjI4yjE=}
2008-10-30 14:37:55, Info                  CSI    000001a3 [SR] Could not reproject corrupted file [ml:520{260},l:46{23}]"\??\C:\Windows\System32"\[l:24{12}]"framedyn.dll"; source file in store is also corrupted
2008-10-30 14:37:56, Info                  CSI    000001a4 Repair results created:
POQ 78 starts:
 
POQ 78 ends.
2008-10-30 14:37:56, Info                  CSI    000001a5 [SR] Repair complete
2008-10-30 14:37:56, Info                  CSI    000001a6 [SR] Committing transaction
2008-10-30 14:37:56, Info                  CSI    000001a7 Creating NT transaction (seq 1), objectname [6]"(null)"
2008-10-30 14:37:56, Info                  CSI    000001a8 Created NT transaction (seq 1) result 0x00000000, handle @0xf34
2008-10-30 14:37:56, Info                  CSI    000001a9@2008/10/30:18:37:56.038 CSI perf trace:
CSIPERF:TXCOMMIT;3
2008-10-30 14:37:56, Info                  CSI    000001aa [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction  have been successfully repaired
0
 
LVL 10

Expert Comment

by:tboy6423
ID: 22844285
Your framedyn.dll appears to be corrupt, please follow these instructions to fix that issue:
http://hubpages.com/hub/Fix-Framedyndll-Error-Easily 
0
 

Author Comment

by:mustang_keith
ID: 22847177
Seems I finally got IIS installed, but when trying to add a new site, under binding, the drop down is blank. So therefore I can create a new website.
0
 

Author Comment

by:mustang_keith
ID: 22849259
Above statement should be I can not create a new website.

Also I have tried deleting the inetsrv folder for a re-install and says access is denied.  I am logged in as administrator.
0
 
LVL 10

Expert Comment

by:tboy6423
ID: 22867046
check the IIS7.LOG  and post it here... there must be some errors in there.
0
 

Author Comment

by:mustang_keith
ID: 22873332
What I had to do to get it to work was uninstall IIS and WPS.  The key was uninstalling WPS too.

Thanks for your help and input!
0
 
LVL 1

Accepted Solution

by:
Computer101 earned 0 total points
ID: 23179682
PAQed with points refunded (250)

Computer101
EE Admin
0

Featured Post

What is SQL Server and how does it work?

The purpose of this paper is to provide you background on SQL Server. It’s your self-study guide for learning fundamentals. It includes both the history of SQL and its technical basics. Concepts and definitions will form the solid foundation of your future DBA expertise.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Logparser is the smartest tool I have ever used in parsing IIS log files and there are many interesting things I wanted to share with everyone one of the  real-world  scenario from my current project. Let's get started with  scenario - How do w…
There are many reasons a PC runs slower than when it was new, ranging from malicious software intended to mess things up to simple general Windows use.  Your PC performance may slowly degrade over time without you noticing but when you buy a PC from…
The Task Scheduler is a powerful tool that is built into Windows. It allows you to schedule tasks (actions) on a recurring basis, such as hourly, daily, weekly, monthly, at log on, at startup, on idle, etc. This video Micro Tutorial is a brief intro…
Two types of users will appreciate AOMEI Backupper Pro: 1 - Those with PCIe drives (and haven't found cloning software that works on them). 2 - Those who want a fast clone of their boot drive (no re-boots needed) and it can clone your drive wh…

856 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question