Solved

Removing Remark from ACL

Posted on 2008-10-30
3
2,024 Views
Last Modified: 2010-04-21
I need to remove remarks from multiple access lists

access-list 100 remark auto generated by SDM firewall configuration
access-list 100 remark SDM_ACL Category=1
access-list 100 remark Test
access-list 100 remark Permit NAT Passthrough

adding no will delete the entire acl. I don't want to delete it then paste it back in with out it.
0
Comment
Question by:DowntownIT
  • 2
3 Comments
 
LVL 43

Accepted Solution

by:
JFrederick29 earned 125 total points
ID: 22843864
This should work:

conf t
ip access-list ext 100
no remark auto generated by SDM firewall configuration
no remark SDM_ACL Category=1
no remark Test
no remark Permit NAT Passthrough
0
 
LVL 2

Author Closing Comment

by:DowntownIT
ID: 31511789
It worked on my 2800 but not on my 2600.
Thanks!
0
 
LVL 43

Expert Comment

by:JFrederick29
ID: 22843984
Probably running older code on the 2600 which is why it didn't work on the 2600.
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Cisco 2960 PACL 9 93
cisco switch POE watt limitation 5 57
Vlan to Vlan communication 9 69
2 Gateways (bandwidth) - One domain 7 44
Have you experienced traffic destined through a Cisco ASA firewall disappears and you do not know if the traffic stops in the firewall or somewhere else? The solution is the capture feature. This feature was released in 6.2(1) and works in all firew…
We've been using the Cisco/Linksys RV042 for years as: - an internet Gateway - a site-to-site VPN device - a leased line site-to-site subnet-to-subnet interface (And, here I'm assuming that any RV0xx behaves the same way as an RV042.  So that's …
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

948 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

20 Experts available now in Live!

Get 1:1 Help Now