?
Solved

Cisco 5505 ASA - Can not reach website on DMZ from Inside Network using ?www.domain.com", do not have a dns server, tried following cisco config guide but it's not working

Posted on 2008-10-30
4
Medium Priority
?
550 Views
Last Modified: 2012-08-13
I can not access my website using domain name or external ip from my inside network to the dmz.  I do not have a dns server. I can access it externally from home and other locations.
config-10-30-08-2.TXT
0
Comment
Question by:Josh R
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
4 Comments
 
LVL 3

Expert Comment

by:leonjs
ID: 22844323
Try adding this command
static (dmz,inside) tcp <outside interface ip> www 192.168.1.2 www netmask 255.255.255.255
0
 
LVL 1

Author Comment

by:Josh R
ID: 22844544
That didn't work, I had to take out another static to get it to take, clear xlate between commands also.
0
 
LVL 1

Author Comment

by:Josh R
ID: 22850098
I have a case opened with Cisco, they said it could be done in the book so I'll see what they say if no one else has any ideas.
0
 
LVL 1

Accepted Solution

by:
Josh R earned 0 total points
ID: 22853720
Looks like I'm going to try the forwarding in DNS, snap in wasn't loaded but I over looked where to turn it on. Cisco basically said I would need a second public ip, if it was a regular website I could just use the ip address and that would be fine but it's something another company came up with and it's a pain to work with.
0

Featured Post

WatchGuard's M Series Appliances - Miecom Approved

WatchGuard's newest M series appliances were put to the test by Miercom.  We had great results and outperformed all of our competitors in both stateless and stateful traffic throghput scenarios! Ready to see how your UTM appliance stacked up? Download the Miercom Report!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I recently had the displeasure of buying a new firewall at one of the buildings I play Sys Admin at. I had to get a better firewall than the cheap one that I had there since I was reconnecting the main office to the satellite office via point-to-poi…
Network traffic routing plays key role in your network, if you have single site with heavy browsing or multiple sites, replicating important application data from your Primary Default Gateway ,you have to route your other network traffic from your p…
Monitoring a network: how to monitor network services and why? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the philosophy behind service monitoring and why a handshake validation is critical in network monitoring. Software utilized …
In this video, Percona Solution Engineer Dimitri Vanoverbeke discusses why you want to use at least three nodes in a database cluster. To discuss how Percona Consulting can help with your design and architecture needs for your database and infras…
Suggested Courses
Course of the Month10 days, 23 hours left to enroll

770 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question