Solved

Terminal Server 2008

Posted on 2008-10-30
4
250 Views
Last Modified: 2012-05-05
The terminal server 2008 web access, is there anyway to run this without an active x control install or any additional installations needed?  For example it does not seem to work without RDP 6.1.

Even if you run a server in the middle that can run these add-ons for the remote client pcs?
0
Comment
Question by:Jack_son_
4 Comments
 
LVL 19

Accepted Solution

by:
aissim earned 500 total points
ID: 22846088
Pretty sure there is no workaround for using the TS Web Access feature.....6.1 is needed. Recently spent some time myself looking for another way and couldn't come up with anything.

Your other (slightly less stringent) option would be using the TS RemoteApp Manager to create an .rdp file, or windows installer package that deploys the .rdp(s), which bypasses the need to visit the Web Access site and only requires RDP client 6.0
0
 

Author Comment

by:Jack_son_
ID: 22984118
Do you think an http proxy with TS would work?
0

Featured Post

Best Practices: Disaster Recovery Testing

Besides backup, any IT division should have a disaster recovery plan. You will find a few tips below relating to the development of such a plan and to what issues one should pay special attention in the course of backup planning.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Normally after a failure of Domain Controller, when promoting new DC the DC is renamed, we will discuss the options in Dcpromo to re-create the DC with the same name. Scenario: You are a small IT shop with two Domain Controllers (Domain Contr…
If you migrate a Terminal Server licenses server inside the 2008 server family, you can takte advantage of the build-in migration tool. If you like to migrate an older 2003 Server (and the installed client CALs) to a 2008 R2 server for example, you …
This tutorial will give a short introduction and overview of Backup Exec 2012 and how to navigate and perform basic functions. Click on the Backup Exec button in the upper left corner. From here, are global settings for the application such as conne…
This tutorial will walk an individual through the steps necessary to install and configure the Windows Server Backup Utility. Directly connect an external storage device such as a USB drive, or CD\DVD burner: If the device is a USB drive, ensure i…

813 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

11 Experts available now in Live!

Get 1:1 Help Now