Solved

Vmware Server lab and Freesco 0.3.8

Posted on 2008-10-30
1
996 Views
Last Modified: 2008-11-06
We've created a 2 subnet lab on a Win2008 host using Vmware Server 2 and Freesco 0.3.8 .   Our problem is that everything works fine for a while i.e can ping all servers in both subnets from all boxes,  but then after a while i can't ping anything.  if i reboot the Freesco it will fix it, though not everyt time.  We then need to reboot all VMs.  Any idea what would cause this?

Thanks
0
Comment
Question by:kswan_expert
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 8

Accepted Solution

by:
aldanch earned 500 total points
ID: 22855530
It seems like your Freesco VM is dropping the config. Try rebuilding your Freesco router and test again

Are you using the VM or Floppy image of Freesco or did you build it yourself?

I've uploaded these images for you to use

Freesco Floppy Image: http://www.filedropper.com/virtualrouter

Freesco (0.3.8) VM: http://www.filedropper.com/freesco038
0

Featured Post

Manage your data center from practically anywhere

The KN8164V features HD resolution of 1920 x 1200, FIPS 140-2 with level 1 security standards and virtual media transmissions at twice the speed. Built for reliability, the KN series provides local console and remote over IP access, ensuring 24/7 availability to all servers.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

When converting a physical machine to a virtual machine using VMware vCenter Converter Standalone or vCenter Converter Enterprise, if an adapter type is not selected during the initial customization the resulting virtual machine may contain an IDE d…
When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…
Monitoring a network: why having a policy is the best policy? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the enormous benefits of having a policy-based approach when monitoring medium and large networks. Software utilized in this v…
Suggested Courses

635 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question