Solved

Setting the flow control on a cisco router?

Posted on 2008-10-31
4
2,518 Views
Last Modified: 2011-10-19
I have a core cisco 7505 router that has two gigabit ethernet modules in it.  Both are setup exactly the same and are connected to identical gbics on the other end.  When it type show int on the cli one says the the flow control in and out is unsupported.  I have attached the show int for the gigabit ethernet interfaces.  Can these setting be changed?
inter.txt
0
Comment
Question by:MPCS
  • 2
  • 2
4 Comments
 
LVL 15

Expert Comment

by:bkepford
ID: 22850274
Flowcontrol is off by default just use the flowcontrol on command to turn it on.
With that said unless you have a reason to turn it on such as congestion on the line I would leave it off.
0
 

Author Comment

by:MPCS
ID: 22850295
I do want to turn the flow control to unsupported or off. What is the proper CLI command?
0
 
LVL 15

Expert Comment

by:bkepford
ID: 22850433
flowcontrol none
it depends on the platform and it is kinda vague.
Here is a link
http://www.cisco.com/en/US/docs/ios/lanswitch/command/reference/lsw_b1.html#wp1021027 
0
 

Accepted Solution

by:
MPCS earned 0 total points
ID: 22990700
The link was close but the IOS must have been an older version.  It did not have the 'flow' option.  Bailed on the whole thing since I was in the process of installing a new core layer 3 switch.  But thanks for the help.
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Systems talking to each other 5 130
BGP Code 12 47
Cisco 2911/Etherswitch: Bringing up SVI and not seeing vlan on one side of trunk 7 53
BGP Network restrictions 6 34
Quality of Service (QoS) options are nearly endless when it comes to networks today. This article is merely one example of how it can be handled in a hub-n-spoke design using a 3-tier configuration.
Shadow IT is coming out of the shadows as more businesses are choosing cloud-based applications. It is now a multi-cloud world for most organizations. Simultaneously, most businesses have yet to consolidate with one cloud provider or define an offic…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

816 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

8 Experts available now in Live!

Get 1:1 Help Now