Solved

How do I connect to a vpn Edge firewall that has been reset?

Posted on 2008-10-31
1
1,578 Views
Last Modified: 2013-11-16
I have a vpn Edge model number SBX-166LHGE-3 that has been reset . How do I connect to it to set it up please?

Thanks
0
Comment
Question by:robquartzelec
1 Comment
 
LVL 14

Accepted Solution

by:
grimkin earned 500 total points
ID: 22850737
HI,

You should get an IP assigned by DHCP, if not assign your PC something like 192.168.10.10.

You should then be able to browse to http://my.firewall. or alternatively http://192.168.10.1.

HTH
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

To setup a SonicWALL for policy based routing to be used with the Websense Content Gateway there are several steps that need to be completed. Below is a rough guide for accomplishing this. One thing of note is this guide is intended to assist in the…
Let’s list some of the technologies that enable smooth teleworking. 
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

825 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question