Solved

CME and phone registeration

Posted on 2008-11-02
2
430 Views
Last Modified: 2009-01-19
I have a 3745 running CME. I'm running CIPC on a laptop and using the web interface to manage the device but I can't make the phone register with the CME. Here is my code, does anything look wrong?
Router#show run
Building configuration...
 
Current configuration : 1111 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
memory-size iomem 5
ip cef
!
!
!
!
!
multilink bundle-name authenticated
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
archive
 log config
  hidekeys
!
!
!
!
!
!
interface FastEthernet0/0
 ip address dhcp
 duplex auto
 speed auto
!
interface FastEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
!
!
!
ip http server
no ip http secure-server
ip http path flash:
!
!
!
!
!
!
!
control-plane
!
!
!
!
!
!
!
!
!
!
telephony-service
 max-ephones 15
 max-dn 100
 ip source-address 192.168.1.110 port 2000
 max-conferences 8 gain -6
 web admin system name admin password admin
 dn-webedit
 time-webedit
 transfer-system full-consult
!
!
ephone-dn  1  dual-line
 number 27401 secondary 4082727401 no-reg both
 label Tonylabel
 description First Line
 name Tony H
!
!
ephone  1
 device-security-mode none
 mac-address 001B.xxxx.3D99
 type CIPC
!
!
!
line con 0
line aux 0
line vty 0 4
!
 
!
webvpn cef
!
end

Open in new window

0
Comment
Question by:jjmartineziii
  • 2
2 Comments
 
LVL 5

Accepted Solution

by:
devangshroff earned 500 total points
ID: 22865006
enable auto register in CME under telephone-service and restart phone
0
 
LVL 5

Expert Comment

by:devangshroff
ID: 22865009
what about the VLAN , did u created voice and data vlan
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Two of my three WiFi Routers lose connection 6 68
Problem to router 7 71
Multiple MPLS Circuits Connecting to LAN 3 43
Cisco Edge Routers for BGP 6 52
There are two basic ways to configure a static route for Cisco IOS devices. I've written this article to highlight a case study comparing the configuration of a static route using the next-hop IP and the configuration of a static route using an outg…
Quality of Service (QoS) options are nearly endless when it comes to networks today. This article is merely one example of how it can be handled in a hub-n-spoke design using a 3-tier configuration.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

828 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question