?
Solved

Bonding 2 E1

Posted on 2008-11-03
1
Medium Priority
?
397 Views
Last Modified: 2012-05-05
hi i would like a sample config to bond 2 e1 which is from the same isp. exsiting router used is cisco 2851
pls help ASAP
0
Comment
Question by:rcollie
1 Comment
 
LVL 79

Accepted Solution

by:
lrmoore earned 1500 total points
ID: 22878496
It depends on if the ISP supports bonded T1's. Ask them if they support ppp multilink. Here is an example:

!
interface multilink 1
  description 4 X SBC Circuit to Kingsville PD
  ip address 192.168.255.253 255.255.255.252
!
interface Serial0/0:0
 no ip address
 no fair-queue
 pulse-time 3
 encap ppp
 ppp multilink
 multilink-group 1
!
interface Serial0/1:0
 no ip address
 no fair-queue
 pulse-time 3
 encap ppp
 ppp multilink
 multilink-group 1
!
0

Featured Post

Vote for the Most Valuable Expert

It’s time to recognize experts that go above and beyond with helpful solutions and engagement on site. Choose from the top experts in the Hall of Fame or on the right rail of your favorite topic page. Look for the blue “Nominate” button on their profile to vote.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

While it is possible to put two routes in place with the secondary having a higher metric, this may not always work. In the event of a failure that does not bring down the physical interface on the router the primary route is not removed. There is a…
Creating an OSPF network that automatically (dynamically) reroutes network traffic over other connections to prevent network downtime.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

840 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question